Custom Motorcycle Gas Tanks

For years, chopper heads have been cutting up and narrowing the classic Harley Sportster tank.  Lowering the tunnel to give it that "Frisco" style ...

This reproduction of the original Wassell peanut tank sits deep over your frame’s backbone, creating a low profile look.  It uses a vented Harley c...

The mid-tunnel Wassell style peanut tank is the happy medium between our Frisco Wassell gas tank and our Deep Tunnel Wassell gas tank.  It’s like t...

This classic Sportster gas tank has been set up with a low "Frisco" tunnel to maximize fuel capacity and sit high and stylish on the backbone. Comm...

The Narrow Mustang tank is about as chopper as it gets. This is the tank they used on the Captain America bike for crying out loud!   Features: Un...

This single piece stamped shell is the same one used to construct our narrow sporty gas tank.  If you are looking to put your own touch on a narrow...

This unique gas tank starts with the same shells we use for our other Wassell inspired gas tanks, then we narrowed it 1” before the halves were wel...

With this tank, we narrowed up the axed gas tank just a little bit.  It’s a subtle difference but provides a nice skinny look.  This tank has a low...

This Sportster gas tank shell is a great start to a custom gas tank fabrication project. This is the same size as the stock Sportster shells of the...

These pre-fabricated Wassell style tank shells are a great start to a custom gas tank.  Since the hard part has already been completed, you'll have...

This tank has a classic Wassell shape with a Frisco tunnel.  It sits high and level with your frame backbone.  Features: Undrilled mounting tabs ...

If you want small and compact, this is your gas tank.  It is the smallest, most stylish gas tank on the market! Features: Single 1/4" NPT petcock ...

The classic axed chopper tank is also referred to as a wasp or alien gas tank. It gets its name from the process through which its built: a set of ...

The classic axed chopper tank is also referred to as a wasp or alien gas tank.  It gets its name from the process through which its built:  A set o...

This gas tank is a stock replacement for Harley Davidson Sportsters from years 1986-2003.  Constructed from 18 gauge steel, it is thicker than stoc...

This custom indented Sporty is a great fit for your slick chopper or bobber.  The indented scalloped sides add depth to the tank sides.  The Frisco...

These 3.5 gal Fat Bob gas tanks are a direct replacement for Harley Davidson part # 61219-83 and 61425-83.  They will fit Big Twin Harley frames fr...

This Sportster gas tank with fit electronic fuel injected (EFI) models 2007-Later.  It is a direct bolt-on tank requiring no modifications.  The ta...

The Dished Wassell Style gas tank is a throwback to sixties show bikes.  The recessed dishing perfectly matches the outside lines of the tank and i...

The dished Wassell style gas tank is a throwback to sixties show bikes.  The recessed dishing perfectly matches the outside lines of the tank and i...

This Frisco Sportster tank is a direct bolt on for 2007 and up Sportsters which use electronic fuel injection (EFI).  The custom tank will use the ...

This Frisco Sportster gas tank has the classic Sportster shape with the custom features you want.  It has a Frisco bottom low tunnel mount paired w...

This single piece stamped Sportster gas tank shell is the same one used to construct our Custom Frisco Sporty gas tank.  If you are looking to weld...

Super well-made lift kit - the best you'll find. Simply remove your tank's front mount hardware, slide this bracket in and using your stock hardwar...

King Sportster gas tank holds 3.1 gallons and is approximately 2" wider than stock tanks. Tank dimensions are 17 1/2" length x 10 3/4" width. Fits ...

This super narrow Sportster tank is a perfect addition to our line of custom tanks. Its slimmer lines add custom style to a traditional design.  O...

Peace of mind and some more miles is what our anodized aluminum 1.5 liter reserve bottle gets you. Not only can it dish out confidence, it can make...

Peace of mind and some more miles is what our anodized aluminum 1.5 liter fuel bottle gets you. Not only can it dish out confidence, it can make a ...

Peace of mind and some more miles is what our anodized aluminum 1.5 liter fuel bottle gets you. There's no explaining where you got it, either- our...

Peace of mind and some more miles is what our anodized aluminum 1.5 liter reserve bottle gets you. Not only can it dish out confidence, it can make...

Peace of mind and some more miles is what our anodized aluminum 1.5 liter fuel bottle gets you. Not only can it dish out confidence, it can make a ...

Mustang tank with screw bung.Tank measures approximately 17" L x 11.5" & 2" W tunnel3.3 gal capacity, fitted centre right hand 3/8" NPT gas out...

Peanut style tanks to fit 2004 to present stock Sportster frames. Fuel capacity is approximately 3.3 gallon. Available complete with your choice of...

The Mid USA peanut tank is great throwback to the Wassell gas tank styling of the 1960s.  If you're building a chopper or bobber reminiscent of tha...

The Mid USA peanut tank is great throwback to the Wassell gas tank styling of the 1960s.  If you're building a chopper or bobber reminiscent of tha...

Larger King Sportster style gas tank for early evolution Sportsters.  Uses 22mm petcock and later screw in style gas cap  1132  King tank is approx...

5 gallon capacity Manufactured with 1982/Later factory style screw-in gas cap bungs Will accept an FL single speedo style or low rider style instr...

Peace of mind and some more miles is what our aluminum 1.5 liter fuel bottle gets you. Not only can it dish out confidence, it can make a statement...

You were smart enough to get your hands on one of our Fuel Reserve Bottles, but you don't have a saddle bag (or room in it) to put your extra fuel?...

Harley Sportster Gas Tank 1958-1978 - Throttle Addiction - Raw - Unfinished.  This gas tank is a stock replacement for Harley Davidson Sportsters f...

Precision-made tanks are TIG-welded construction using deep-drawn steel Includes all mounting hardware Use 99 & Up style vented gas cap - Scre...

Precision-made tanks are TIG-welded construction using deep-drawn steel Includes all mounting hardware Use 99 & Up style vented gas cap - Scre...

Install using stock mounts Precision-made tanks are TIG-welded construction using deep-drawn steel Includes all mounting hardware Use 99 & Up ...

This classic Prism style chopper gas tank is the perfect fit for a long raked out vintage motorcycle.  It features a multi angle design and shallo...

This custom coffin style chopper gas tank will have you cruising in vintage 70's style! Perfect for that long raked out chopper. Features: 1/4...