Sportster Parts

For years, chopper heads have been cutting up and narrowing the classic Harley Sportster tank.  Lowering the tunnel to give it that "Frisco" style ...

This classic Sportster gas tank has been set up with a low "Frisco" tunnel to maximize fuel capacity and sit high and stylish on the backbone. Comm...

This single piece stamped shell is the same one used to construct our narrow sporty gas tank.  If you are looking to put your own touch on a narrow...

This Sportster gas tank shell is a great start to a custom gas tank fabrication project. This is the same size as the stock Sportster shells of the...

This slick fender is a stripped down and cleaned up version of the 1952-1978 Harley Sportster fender.  It differs from the stock fender in that the...

This seat bracket will fit most solo seats. It features two long slots for adjustability. The pivot bracket is unfinished so it can be welded to th...

This custom fairing is designed to fit narrow glide Harley Davidson front ends using visor mount 5 3/4" headlight.  It is ready to run as-is or can...

These navy blue hard plastic grips from Chicago Motorcycle Supply are continued production runs from the original molds.  These are still being mad...

These hunter green hard plastic grips from Chicago Motorcycle Supply are continued production runs from the original molds.  These are still being ...

These white hard plastic kickers from Chicago Motorcycle Supply are continued production runs from the original molds. These are still being made i...

This marble yellow kicker from Chicago Motorcycle Supply is a genuine New Old Stock (NOS).  All remaining stock was purchased along with the toolin...

Chicago Motorcycle Supply is still alive and producing these quality plastic kicker pedals from the original molds.  Just like back in the day, the...

Chicago Motorcycle Supply is still alive and producing these quality plastic kicker pedals from the original molds.  Just like back in the day, the...

This marble blue kicker from Chicago Motorcycle Supply is a genuine New Old Stock (NOS).  All remaining stock was purchased along with the tooling ...

If you want small and compact, this is your gas tank.  It is the smallest, most stylish gas tank on the market! Features: Single 1/4" NPT petcock ...

Please allow up to 1 week production time. Our Throttle Addiction weld on Sportster hard tail kit will transform your stock swing arm Sportster int...

The Ronald grips were designed by the man Andy Carter of Pangea Speed to be clean and simple.  The 1" grips fit standard Harley throttle tubes whic...

The Ronald grips were designed by the man Andy Carter of Pangea Speed to be clean and simple.  The 1" grips fit standard Harley throttle tubes whic...

Chicago Motorcycle Supply lives on!  These Hard Plastic grips are still being produced in the USA from the original molds.  Just like the originals...

Chicago Motorcycle Supply lives on!  These hard plastic grips are still being produced in the USA from the original molds.  Just like the originals...

Chicago Motorcycle Supply lives on!  These hard plastic grips are still being produced in the USA from the original molds.  Just like the originals...

Chicago Motorcycle Supply lives on!  These hard plastic grips are still being produced in the USA from the original molds.  Just like the originals...

Chicago Motorcycle Supply is still alive and producing this quality cast aluminum kicker pedal from the original molds.  Just like back in the day,...

Chicago Motorcycle Supply is still alive and producing this quality cast bronze kicker pedal from the original molds.  Just like back in the day, t...

Chicago Motorcycle Supply is still alive and producing these quality plastic kicker pedals from the original molds.  Just like back in the day, the...

Vintage style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes chrome top cla...

Classic style rabbit ear pull back handlebars give you a tight comfortable grip on your bike.  They look great on long raked out choppers or stock ...

The Tee handlebars put you in a tight, aggressive riding position.  A slight 2” pullback slightly relaxes the wrists for a more comfortable grip.  ...

In stock, ready to ship! Throttle Addiction weld on hardtail mates beautifully to all Harley Davidson Panhead and Shovelhead swing arm frames from ...

1” dual cable throttle assembly for use on custom Harleys that want a clean handlebar set up.  Clamp assembly is die cast chrome-plated aluminum an...

These fork shrouds are designed to fit Harley 39mm front ends used on Sportsters and some Dyna models.  They are a quick bolt on part that requires...

These fork shrouds are designed to fit Harley 39mm front ends used on Sportsters and some Dyna models.  They are a quick bolt-on part that requires...

These fork shrouds are designed to fit Harley 39mm front ends used on Sportsters and some Dyna models.  They are a quick bolt on part that requires...

These fork shrouds are designed to fit Harley 39mm front ends used on Sportsters and some Dyna models.  They are a quick bolt on part that requires...

Sometimes, old is better and the vintage apes follow that creed.  Unlike more modern styled ape hangers, these have a narrow clamping area and spre...

Sometimes old is better and the vintage apes follow that creed.  Unlike more modern styled ape hangers, these have a narrow clamping area and sprea...

Sometimes old is better and the vintage apes follow that creed.  Unlike more modern styled ape hangers, these have a narrow clamping area and sprea...

Pangea Speed makes this super sleek chopper mirror that will keep you “legal” and actually be useful.  The 2” diameter concave mirror will keep you...

This gas tank is a stock replacement for Harley Davidson Sportsters from years 1986-2003.  Constructed from 18 gauge steel, it is thicker than stoc...

This custom indented Sporty is a great fit for your slick chopper or bobber.  The indented scalloped sides add depth to the tank sides.  The Frisco...

These zinc-plated handlebar bushings replace the rubber bushings and cap washers in Harley triple trees.  If you’re running taller bars or risers r...

This Sportster gas tank with fit electronic fuel injected (EFI) models 2007-Later.  It is a direct bolt-on tank requiring no modifications.  The ta...

These chrome plated drag pipes for your Harley Davidson Evolution Sportster from 1986-2003 will add a nice low rumbling tone.  They feature a slash...

This 5” vintage style raw steel fender is a close reproduction to the original Wassell ribbed fenders of years past.  The sides are edge rolled wit...

This stock style mid control kit fits Harley Davidson Sportsters from 1991-2003.  Mid foot controls put the rider in a more controlling position ov...

These chrome plated drag pipes for your Harley Ironhead Sportster from 1957-1985 (excluding years 1979) will add a nice low rumbling tone.  The pip...

This exhaust set kit will replace Harley Davidson OEM # 65328-83, 65325-83.  Each set includes 2 chrome flanges and 2 retaining clips.  Fitment: ...