Triumph Parts

This reproduction of the original Wassell peanut tank sits deep over your frame’s backbone, creating a low profile look.  It uses a vented Harley c...

The mid-tunnel Wassell style peanut tank is the happy medium between our Frisco Wassell gas tank and our Deep Tunnel Wassell gas tank.  It’s like t...

If you're looking for a great alternative to the original Wassell ribbed motorcycle fender, you've found it.  Unlike the thin metal, beat up origin...

This new premier concentric carburetor is from Amal of England.  It has vintage styling with modern performance.  It comes with a new stay up float...

This Rockerbox oil feed is for Unit Triumph motorcycles.  They are styled after the finned Webco models and machined from 6061 aluminum.  Fits Triu...

JRC Engineering has modified these Keihin carburetors to bolt directly to British motorcycles.  They were designed as a modern alternative to the A...

Finned Webco style points cover for Triumph motorcycles. Cast aluminum with a polished finish.

Complete gasket kit for Triumph 650 motorcycles years 1963-1973.  A must for any engine rebuild.

Drag style handlebars are a great fit for motorcycles running taller risers.  For an aggressive feel, trim a few inches off each end and narrow the...

These cocktail shaker mufflers are versatile enough to look great on any style of motorcycles.  Be it a Harley Davidson chopper or a Triumph café r...

These grips are straight from JTC Engineering "Genuine Spares" Amal-style grips found on British bikes of the 1960s.  These grips are black in colo...

This classic Sportster gas tank has been set up with a low "Frisco" tunnel to maximize fuel capacity and sit high and stylish on the backbone. Comm...

This unique gas tank starts with the same shells we use for our other Wassell inspired gas tanks, then we narrowed it 1” before the halves were wel...

These will fit Triumph and BSA 650 exhaust with 1 3/4" exhaust headers.  Each sold separately. Features: Chrome plated Includes bolts Mea...

This velocity stack fits Amal 900 series (928/930/932) carburetors. Feature: Polished aluminum with screen Measurements: 2" tall, 3" wid...

This seat bracket will fit most solo seats. It features two long slots for adjustability. The pivot bracket is unfinished so it can be welded to th...

We took our raw steel Wassell style ribbed fender and dipped it for a beautiful show chrome finish.  The fender has been stamped from single piece ...

This tank has a classic Wassell shape with a Frisco tunnel.  It sits high and level with your frame backbone.  Features: Undrilled mounting tabs ...

Sometimes, old is better and the vintage apes follow that creed.  Unlike more modern styled ape hangers, these have a narrow clamping area and spre...

This 5” vintage style raw steel fender is a close reproduction to the original Wassell ribbed fenders of years past.  The sides are edge rolled wit...

This ribbed fender is probably best suited for front wheels, but if you’re running a super skinny rear wheel then this will do the trick.  At 4” wi...

Triumph motorcycles patent badge iron-on patch.   Measures 3.5" x 3"

These vintage style cloth wrapped spark plug wires will add a nice accent to your vintage motorcycle.  They feature 7mm solid core copper conductor...

These vintage style cloth wrapped spark plug wires will add a nice accent to your vintage motorcycle.  They feature 7mm solid core copper conductor...

These vintage style cloth wrapped spark plug wires will add a nice accent to your vintage motorcycle.  They feature 7mm solid core copper conductor...

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use...

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use...

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use...

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use...

These vintage style cloth wrapped spark plug wires will add a nice accent to your vintage motorcycle.  They feature 7mm solid core copper conductor...

The Dished Wassell Style gas tank is a throwback to sixties show bikes.  The recessed dishing perfectly matches the outside lines of the tank and i...

The dished Wassell style gas tank is a throwback to sixties show bikes.  The recessed dishing perfectly matches the outside lines of the tank and i...

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use...

These main jets are direct from the Amal factory and are the best on the market for tuning your genuine Amal British carburetor.  Use these to incr...

These main jets are direct from the Amal factory and are the best on the market for tuning your genuine Amal British carburetor.  Use these to incr...

These main jets are direct from the Amal factory and are the best on the market for tuning your genuine Amal British carburetor.  Use these to incr...

These main jets are direct from the Amal factory and are the best on the market for tuning your genuine Amal British carburetor.  Use these to incr...

If you break open your Amal carburetor for a rebuild, then you'll want to use this kit to freshen up and replace old gaskets and seals.  The kit in...

Black neoprene motorcycle fuel line is reinforced with a high strength rayon mesh. Resists fuel, oil and grease Maximum PSI of 200 with a burst...

This is the bracket if you're looking to run dual headlights on your chopper.  Will require drilling hole in your bottom triple tree, otherwise it ...

This rockerbox oil feed is for pre unit Triumphs and will replace the stock oil feed tubes.  This slick custom Webco style part will dress up your ...

This 21” spool chopper wheel features a made in the USA polished 40 spoke aluminum spool hub, made in the USA chrome spoke and nipples, and an impo...

 Dimensions: 29" tip to tip 6" wide 13.5" tall

This custom weld-on kickstand is a great option for a ground up motorcycle build.  The sleek design features an internal spring and ball system to ...

Yellow metal flake motorcycle grips for 7/8" handlebars using an external throttle sleeve.  Set includes one 7/8" grip for clutch side, and a 1" gr...

This 21" x 2.15" chopper spool wheel is easy on the wallet and friendly on the eyes.  It features a slick, smooth rim without any ribs and a no-fri...

This 21" x 1.85" chopper spool wheel is a stripped down, brakeless wheel originated on the flat track and adopted for no frill choppers.  It featur...

This velocity stack fits Amal 900 series (928/930/932) carburetors. Feature: Aluminum constrution Measurements: 2" tall, 3" wide at bell