Gas Tanks & Fuel

For years, chopper heads have been cutting up and narrowing the classic Harley Sportster tank.  Lowering the tunnel to give it that "Frisco" style ...

This reproduction of the original Wassell peanut tank sits deep over your frame’s backbone, creating a low profile look.  It uses a vented Harley c...

The mid-tunnel Wassell style peanut tank is the happy medium between our Frisco Wassell gas tank and our Deep Tunnel Wassell gas tank.  It’s like t...

This classic Sportster gas tank has been set up with a low "Frisco" tunnel to maximize fuel capacity and sit high and stylish on the backbone. Comm...

The Narrow Mustang tank is about as chopper as it gets. This is the tank they used on the Captain America bike for crying out loud!   Features: Un...

This single piece stamped shell is the same one used to construct our narrow sporty gas tank.  If you are looking to put your own touch on a narrow...

This unique gas tank starts with the same shells we use for our other Wassell inspired gas tanks, then we narrowed it 1” before the halves were wel...

With this tank, we narrowed up the axed gas tank just a little bit.  It’s a subtle difference but provides a nice skinny look.  This tank has a low...

3/8" NTP chrome petcock for 1966-1974 Harley Davidsons or custom gas tanks with a 3/8" NPT bung.  Outlet is angled 90 degree and fits 1/4" ID fuel ...

This Sportster gas tank shell is a great start to a custom gas tank fabrication project. This is the same size as the stock Sportster shells of the...

These pre-fabricated Wassell style tank shells are a great start to a custom gas tank.  Since the hard part has already been completed, you'll have...

Weld-in steel gas filler bung for early style Harley Davidson cam style gas caps.  Great for custom restorations or repair work. Finish your projec...

This flat tunnel base makes Frisco mounting any tank a snap!  Cut to suit and weld to your custom tank or one of our sporty tank shells. Measureme...

This weld-in gas cap bung is a direct replacement for Harley Davidson gas tanks from 1982-present.  Great for repairs or custom gas tanks. Grab thi...

Weld-on bung threaded for 3/8" NPT petcock or fittings. These are great for motorcycle gas tank restorations or custom fabrication. Measurements: ...

Weld-in bung threaded for 1/4" NPT petcock. These are great for motorcycle gas tank restorations or custom fabrication. Top hat design provides a c...

This vented cam or bayonet-style gas cap fits most custom gas tanks and Harley Davidson gas tanks from 1936-1982.  On stock Harley motorcycles runn...

Weld in bung threaded for 1/4" NPT petcock. These are great for motorcycle gas tank restorations or custom fabrication.  Top hat design provides a ...

This tank has a classic Wassell shape with a Frisco tunnel.  It sits high and level with your frame backbone.  Features: Undrilled mounting tabs ...

If you want small and compact, this is your gas tank.  It is the smallest, most stylish gas tank on the market! Features: Single 1/4" NPT petcock ...

The classic axed chopper tank is also referred to as a wasp or alien gas tank. It gets its name from the process through which its built: a set of ...

1/4" NPT petcock will fit many custom motorcycle gas tanks, or other power sports applications.  Male 1/4" national pipe threads with straight outl...

1/4" NPT petcock will fit many custom motorcycle gas tanks or other power sports applications.  Male 1/4" national pipe threads with 90 degree outl...

High quality 1/4” clear polyurethane fuel line will look great on your chopper.  Designed for modern ethanol gas to resist fading or break down.  P...

High quality 1/4” yellow translucent polyurethane fuel line will add a little extra something to your chopper.  Designed for modern ethanol gas to ...

High quality 1/4” red translucent polyurethane fuel line will add a little extra something to your chopper.  Designed for modern ethanol gas to res...

High quality 1/4” purple translucent polyurethane fuel line will add a little extra something to your chopper.  Designed for modern ethanol gas to ...

High quality 1/4” blue translucent polyurethane fuel line will add a little extra something to your motorcycle.  Designed for modern ethanol gas to...

High quality 1/4” orange polyurethane fuel line will add a little extra something to your motorcycle.  Designed for modern ethanol gas to resist fa...

This kit includes everything you need to install a sight gauge into a gas tank.  Colorful fuel line options add some style as well as functionality...

This kit includes everything you need to install a sight gauge into a gas tank.  Colorful fuel line options add some style as well as functionality...

This kit includes everything you need to install a sight gauge into a gas tank.  Colorful fuel line options add some style as well as functionality...

This kit includes everything you need to install a sight gauge into a gas tank.  Colorful fuel line options add some style as well as functionality...

This kit includes everything you need to install a sight gauge into a gas tank.  Colorful fuel line options add some style as well as functionality...

The classic axed chopper tank is also referred to as a wasp or alien gas tank.  It gets its name from the process through which its built:  A set o...

1/4" NTP chrome petcock for custom gas tanks with a 3/8" NPT bung.  Outlet is angled 90 degrees and fits 1/4" ID fuel line.   Features: On, off...

This gas tank is a stock replacement for Harley Davidson Sportsters from years 1986-2003.  Constructed from 18 gauge steel, it is thicker than stoc...

This custom indented Sporty is a great fit for your slick chopper or bobber.  The indented scalloped sides add depth to the tank sides.  The Frisco...

This non-vented cam or bayonet-style gas cap fits Harley Davidson gas tanks from 1936-1982.  On stock Harley motorcycles running two separate fuel ...

These small, compact inline fuel filters work great for ridding your gas of any debris, rust, or dirt prior to hitting the carb.  Their small desig...

These 3.5 gal Fat Bob gas tanks are a direct replacement for Harley Davidson part # 61219-83 and 61425-83.  They will fit Big Twin Harley frames fr...

This Sportster gas tank with fit electronic fuel injected (EFI) models 2007-Later.  It is a direct bolt-on tank requiring no modifications.  The ta...

Screw-in gas cap for Harley Davidson gas tanks from 1982 - early 1996.  This is a vented cap used on single filler gas tanks, or the right side cap...

3/8" NPT chrome petcock for custom gas tanks with a 3/8" NPT bung.  Outlet is straight and fits 1/4" ID fuel line.   Features: On, off and reserve...

Direct replacement for HD part number 62168-81.  Fits stock Harley Davidson motorcycles from 1975-2006 or custom gas tanks with male 22mm bung.  Ou...

Direct replacement for HD part number 62168-81.  Fits stock Harley Davidson motorcycles from 1975-2006 or custom gas tanks with male 22mm bung.  St...