Frame Fabrication Parts

Plasma cut from .175" thick mild steel, this sissy bar insert is a great add on to your sissy bar project.   Ideal for fastening your King & Q...

These DIY hardtail sissy bar kits are designed for use with our Evo Sportster Hardtail Kit, and 5" flat fender, but can fit on most hardtail frames...

These are replica replacement frame Top motor mount stampings made to fit 1953-1969 OEM Harley Davidson Panhead and Shovelhead Frames. Great to rep...

OEM replica front oil tank mount for all early big twin OEM frames. Nice quality reproduction of the original. This is a weld on tab that is alread...

Replacement OEM style brake crossover support tabs for OEM rigid frames Fits 1936-1957 Knucklehead and Panhead frames.  Perfect to repair or restor...

Perfect for restoring your early OEM frame with mechanical drum brakes. These are a nice accurate reproduction and come complete with 1 tube bushi...

Rear 4 speed transmission brace for 1936-1984 Big Twin Frames. These are the braces that run from front to rear underneath your transmission mount...

This replacement neck casting is a copy of the 1936-1940 Knucklehead 25 degree forgings used on Big Twin frames.  The casting is 100% made and mach...

Weld this bad boy on our shovelhead hardtail to allow the use of a juice drum brake.

This kit is designed to simplify the process of building floor board style peg mounts for early HD hard tail frames. Kit includes two upper peg mou...

This is a simple and easy way to mount a tail light between your sissy bar. It comes in mild steel with a 1/2 in. hole and is 6 in. wide. Ready for...

Steel weld on / bolt on seat spring mounting stantions for sprung bates style solo seats. these feature a larger diameter post to keep the spring w...

1/8in thick mild steel backing plate designed to mount our Supercraft taillight but will also work with OG Mastercraft lights as well(if yo...

This kit allows you to mount a horse shoe oil tank to a 36-57 rigid early frame. comes with 2 tabs, 2 threaded bungs, 2 bolts. Tabs are designed wi...

This is a 16g steel mounting bracket that you can weld to the lower part of your fender when running a chopper fender on a big twin rigid frame. Th...

Pangea Speed - Upper Fender Mounting Kit - 139 Includes mounting tab, 2 threaded bungs, 2 washers, and two bolts. mild steel

Replica Harley Knucklehead, Panhead, Flatheat rear fender mount u-clamps secure rear fender to frame cross tube. Sold in a set of two. Hardware inc...

This wrap-around oil tank bracket is a replacement for the stock OE bracket. The bracket has a chrome finish. Fits Knucklehead, Panhead, Flathe...

Allows easy front fender installation. Also fits other brands of wide custom Springers with similar front leg diameters as listed. CNC machined...

Laser cut from .135" thick mild steel, this plate mount is designed to fit Biltwell tail lights.  This is a great add on to your sissy bar project....

Laser cut from .135" thick mild steel, this plate mount is designed to fit our Ford tail lights.  This is a great add on to your sissy bar project....

Laser cut from .135" thick mild steel, this plate mount is designed to fit our Ford tail lights.  This is a great add on to your sissy bar project....

Laser cut from .135" thick mild steel, this light mount is designed to fit our Ford tail lights.  This is a great add on to your sissy bar project....

Laser cut from .135" thick mild steel, this plate mount is designed to fit Lucas tail lights.  This is a great add on to your sissy bar project.   ...

Laser cut from .135" thick mild steel, this plate mount is designed to fit Lucas tail lights.  This is a great add on to your sissy bar project.   ...

Laser cut from .135" mild steel, these handy little tabs can be used for all kinds of things.    1.25" cope 3/8" hole

Plasma cut from .175" thick mild steel, this tab is ideal for mounting fenders to frame cross bars. Or.........  

Laser cut from .135" thick mild steel. This is a great add on to your sissy bar project.    

Laser cut from .125" Stainless Steel, these handy little guys allow you to mount your key switch virtually anywhere!  Designed to work with our Mot...

Laser cut from .125" Stainless Steel, these handy little guys allow you to mount your key switch virtually anywhere!  Designed to work with our Wea...

Need to install your Chopper gas tank? Our Chopper gas tank installation kit includes everything you need for a quick, clean and secure installatio...

Weld-On Fender Mount - One Hole Flat CNC cut from .187" thick mild steel CNC bent 1" wide 3" long 5/16" mounting hole Welds onto frame cros...

Weld-On Fender Mount - Two Hole Flat CNC cut from .187" thick mild steel CNC bent 1" wide 3" long 5/16" mounting holes 2.5" center to cente...

Weld-On Fender Mount Kit - Two Hole Curved CNC cut from .187" thick mild steel CNC bent 1" wide 3" long 5/16" mounting holes 2.5" center to...

Weld On Brake Stay Anchor This weld on brake stay tab allows you to securely attach your brake caliper rod to your frame.   Laser cut from 1/4" mi...

Brake Caliper Anchor Rod - Stainless Steel This universal brake caliper anchor rod allows you to secure your brake caliper to your frame ore front ...

Brake Caliper Anchor Rod - Stainless Steel This universal brake caliper anchor rod allows you to secure your brake caliper to your frame ore front ...

Laser cut from .135" thick mild steel, this plate mount is designed to fit our Box Chopper Tail Light.  This is a great add on to your sissy bar pr...