Fenders

If you're looking for a great alternative to the original Wassell ribbed motorcycle fender, you've found it.  Unlike the thin metal, beat up origin...

This is a smooth fender stamped from a single piece, and has no weld or sanding marks. Its subtle cross radius and end lip detail give it the right...

This slick fender is a stripped down and cleaned up version of the 1952-1978 Harley Sportster fender.  It differs from the stock fender in that the...

We took our raw steel Wassell style ribbed fender and dipped it for a beautiful show chrome finish.  The fender has been stamped from single piece ...

This Fat Bob fender is 7” wide and measures 38” along the top.  It comes undrilled so you can position it as needed on your frame.  The left side h...

This 5” vintage style raw steel fender is a close reproduction to the original Wassell ribbed fenders of years past.  The sides are edge rolled wit...

This ribbed fender is probably best suited for front wheels, but if you’re running a super skinny rear wheel then this will do the trick.  At 4” wi...

 Dimensions: 29" tip to tip 6" wide 13.5" tall

Chrome hardtail fender braces measure 9.5" tall and feature 5/16" threaded mounting bosses.  One brace has a more drastic bend to account for clear...

Chrome hardtail fender braces measure 9.5" tall and feature 5/16" threaded mounting bosses.  One brace has a more drastic bend to account for clear...

OEM spec replacement rear fender for Harley Davidson FXR motorcycles from 1982-1994. Comes pre-drilled for mounting and taillight.   Raw s...

This stock replacement fender is an OEM replica for Harley FX Shovelhead models 1973-1985. Comes predrilled with mounting holes and tail light moun...

This smooth hinged fender is a replacement for Panhead and shovelhead models from 1958-1984.  It features the proper mounting holes for fender str...

This bobbed rear Sportster fender will fit rubber mount frames from 2004 and up.  Features the windowed side wall.  This is a stock replacement of ...

If you’re in the market for the tried and true trailer fender for your motorcycle you found it.  These rear motorcycle fenders are thick, cheap, an...

These fenders hug close and have great lines. There is enough room on the sides to mount a sissy bar or fender struts. These are the real deal - so...

This shortened bobber Sportster fender fits 1982-2003 models. It features no holes or mounts which allows you to customize it as needed but still k...

Grab a pack of these leather washers for your next custom install. Save yourself from scratches when putting on your freshly painted tins or just u...

Grab a pack of these leather washers for your next custom install. Save yourself from scratches when putting on your freshly painted tins or just u...

We took our raw steel Wassell style ribbed fender and dipped it for a beautiful show chrome finish.  The fender has been stamped from single piece ...

Fender comes raw, not predrilled or set up for lights.  Made from 16G steel Raw finish Fitment 04- UP XL Custom Application

Lower Rear Fender Mounting Bracket For Knucklehead Panhead Shovelhead Hardtail Frames. This rear lower rear fender bracket is designed to be welded...

FLSTS raw spring fork front fender. Fender does not have holes for front fender lamp. Length: 29-1/2" Width 6 1/2" OEM Part Number: 59164-97A   FIT...

This is a 16g steel mounting bracket that you can weld to the lower part of your fender when running a chopper fender on a big twin rigid frame. Th...

Pangea Speed - Upper Fender Mounting Kit - 139 Includes mounting tab, 2 threaded bungs, 2 washers, and two bolts. mild steel

Replica Harley Knucklehead, Panhead, Flathead rear fender mount u-clamps secure rear fender to frame cross tube. Sold in a set of two.  Raw steel ...

Allows easy front fender installation. Also fits other brands of wide custom Springers with similar front leg diameters as listed. CNC machined...

Allows easy front fender installation. Also fits other brands of wide custom Springers with similar front leg diameters as listed. CNC machined...

Custom Front Fender Brace. Sportster, Dyna, Shovelhead models using Narrow Glide 35mm or 39mm front forks.   3/16" Thick Black finish Fits narrow ...

Custom Front Fender Brace Narrow Glide Sportster, Dyna, Shovelhead models using Narrow Glide 35mm or 39mm front forks.   3/16" Thick Chrome finish...

This wrap-around oil tank bracket is a replacement for the stock OE bracket. The bracket has a chrome finish. OEM No: 62585-36. Fits Knucklehea...

This wrap-around oil tank bracket is a replacement for the stock OE bracket. The bracket has a chrome finish. Fits Knucklehead, Panhead, Flathe...

Plasma cut from .175" thick mild steel, this tab is ideal for mounting fenders to frame cross bars. Or.........  

Plasma cut from 1/4" thick 1" wide mild steel, this sissy bar fender strap is a great add on to your sissy bar project.  Pair it with our pre bent ...

Plasma cut from 3/16" thick 1" wide mild steel, this sissy bar fender strap is a great add on to your sissy bar project.  Pair it with our pre bent...

Plasma cut from 3/16" thick 1" wide mild steel, this sissy bar fender strap is a great add on to your sissy bar project.  Pair it with our pre bent...

Weld-On Fender Mount - One Hole Flat CNC cut from .187" thick mild steel CNC bent 1" wide 3" long 5/16" mounting hole Welds onto frame cros...

Weld-On Fender Mount - Two Hole Flat CNC cut from .187" thick mild steel CNC bent 1" wide 3" long 5/16" mounting holes 2.5" center to cente...

Weld-On Fender Mount Kit - Two Hole Curved CNC cut from .187" thick mild steel CNC bent 1" wide 3" long 5/16" mounting holes 2.5" center to center...

Front Fender - With Trim Holes - 86-17 FLST Heavy-duty steel construction Raw finish Pre-drilled for easy installation with the OE hardware OE sty...

Front Fender - With Trim Holes - 87-99 FLT/FLHT Raw stamped steel construction Measure approximately 6" W (inside) Mount with OE hardware Fenders ...

Front Fender - Without Trim Holes - 87-99 FLT/FLHT Raw stamped steel construction without trim holes Measure approximately 6" W (inside) Mount w...

Front Fender - Without Trim Holes - Custom - 87-13 Touring Raw stamped steel construction Measure approximately 6" W (inside) Mount with OE hardwa...

XLX-Style Front Fender with Chrome Side Braces - Steel Steel construction with chromed side braces Designed for a close fit on 19" wheel Fitmen...

Front Fender - 54-84 FL  Designed specifically as an OE replacement Also fits FLT and FLHT models when additional trim holes are drilled Replaceme...

Front Fender - 90-99 FLSTF No rivet, smooth-sided steel construction Designed to fit FLSTF front ends with 16" wheels 6.75” wide Replacement OEM ...

Front Fender - Without Trm Holes -  86-17 FLST Heavy-duty steel construction Raw finish Pre-drilled for easy installation with the OE hardware Smo...

Wide Glide-Style Front Fender - 48-84 FL/FLH With 19" or 21" Wheel Custom Wide Glide-style front fender with chrome mounting bracket and raw fin...