Chopper Parts

This is the bracket if you're looking to run dual headlights on your chopper.  Will require drilling hole in your bottom triple tree, otherwise it ...

This 21” spool chopper wheel features a made in the USA polished 40 spoke aluminum spool hub, made in the USA chrome spoke and nipples, and an impo...

 Dimensions: 29" tip to tip 6" wide 13.5" tall

This 40 spoke steel chrome-plated rim is a direct replacement for Harley Davidson part # 43085-81 Specs: 16” X 3.00” Drop center Side valve ...

This 21” wheel utilizes a replica stock Harley hub from Dyna (FX)  and Sportster (XL) models from 1984-1999 and is designed as a replacement for th...

This 21” wheel will fit Dyna (FXD) models from 2000 - 2003 and Sportster (XL) models from 2000 - 2007 and custom applications using a Harley narrow...

This 16" x 3.00 rear wheel is a direct Harley Davidson replacement for all Big Twin and Sportster models from 1979-1999 (except touring models).  T...

Drag style handlebars are a great fit for motorcycles running taller risers.  For an aggressive feel, trim a few inches off each end and narrow the...

Design: Compared to our original Solo seat, the new Solo II has a shorter overall length and two more inches of kick in the tail to deepen the sea...

These chrome-plated handlebar bushings replace the rubber bushings and cap washers in Harley triple trees.  If you’re running taller bars or risers...

These Custom Cycle Engineering 39mm hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 S...

These Custom Cycle Engineering extended 39mm hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-200...

These Custom Cycle Engineering 39mm hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 Sportst...

This custom weld-on kickstand is a great option for a ground up motorcycle build.  The sleek design features an internal spring and ball system to ...

This vented cam or bayonet-style gas cap fits Harley Davidson gas tanks from 1936-1982 and most of the custom gas tanks we sell. Features: Matt...

This vented gloss black cam or bayonet-style gas cap fits Harley Davidson gas tanks from 1936-1982 and most of the custom gas tanks sold by Throttl...

These reproduction Star Hubs are set up with modern style Timken bearings which are a massive improvement over the stock needle bearings.  Preload ...

These reproduction Star Hubs are set up with modern style Timken bearings which are a massive improvement over the stock needle bearings.  Preload ...

These battery boxes from LC Fabrications are designed to flawlessly fit Antigravity 4 cell lithium ion batteries.  They are CNC machined from 6061 ...

These battery boxes from LC Fabrications are designed to flawlessly fit Antigravity 8 cell lithium ion batteries.  They are CNC machined from 6061 ...

This 2 piece scorpion chopper seat is a classic from the good old days. Designed to fit a multitude of custom hardtail framed choppers, it works be...

Classic 2 Piece signature II rigid chopper seat from Le Pera.  This Made in the USA seat has all the bad ass styling required for mounting...

Yellow metal flake motorcycle grips for 7/8" handlebars using an external throttle sleeve.  Set includes one 7/8" grip for clutch side, and a 1" gr...

The Supercraft tail light is an updated slimmed down version of the classic "master craft" chopper tail light. This light features a chrome plated ...

chrome plated seat hinge designed to bolt directly on to big twin Harley frames from 36-56. Works with bates style seats. photos do not match actua...

Classic style rabbit ear pull back handlebars give you a tight comfortable grip on your bike.  They look great on long raked out choppers or stock ...

Throttle Addiction 11" T-bars will leave you with a tight aggressive riding stance.  A slight 2” pullback slightly relaxes the wrists for a more co...

Throttle Addiction 11" T-bars will leave you with a tight aggressive riding stance.  A slight 2” pullback slightly relaxes the wrists for a more co...

Anderson style black rubber grip set which includes a universal throttle housing.  Throttle housing is black, single cable and has a throttle lock....

This 21" x 2.15" chopper spool wheel is easy on the wallet and friendly on the eyes.  It features a slick, smooth rim without any ribs and a no-fri...

This 21" x 1.85" chopper spool wheel is a stripped down, brakeless wheel originated on the flat track and adopted for no frill choppers.  It featur...

Replica oil tank mount and battery tray for Harley Knucklehead and Panhead.  Fits stock oil tanks and frames from 1936- 1964.  Can be adapted for c...

This 1” diameter throttle assembly includes a die cast housing and nylon throttle tube.  The housing is set up for double cable application and has...

This 1” diameter throttle assembly includes a die cast housing and nylon throttle tube.  The housing is set up for single cable applications and ha...

These 12" rise matte black ape hanger bars are skinny in the clamping area and maintain narrow lines.  They are 1" diameter, feature 3.5" spaced kn...

Chrome-plated oil tank filler plug fit Harleys from 1965 to 1999 and most custom oil tanks that have a 1 1/4" filler.  Push in style cap that does ...

If you’re in the market for the tried and true trailer fender for your motorcycle you found it.  These rear motorcycle fenders are thick, cheap, an...

Replica black Harley style waffle grips are soft rubber and have a 1-1/8" inner diameter on the throttle grip and 1" on the left grip. For use wit...

Replica white Harley style waffle grips are soft plastic and have a 1-1/8" inner diameter on the throttle grip and 1" on the left grip.    For us...

Springer fork headlight mount is zinc-plated and constructed of investment cast steel with fine threads. Use this bracket when mounting your afterm...

This complete kit includes all parts needed for a complete rebuild of one set of 39mm front fork leg assemblies commonly found on Sportstser and Dy...

These fenders hug close and have great lines. There is enough room on the sides to mount a sissy bar or fender struts. These are the real deal - so...

This side mount license plate bracket bolts to the lower 1/2" shock bolt allowing an easy relocation of your license plate where a tail light is no...

A clean and well built license plate bracket. This license plate bracket fits any 3/4" axle. Just install the stainless steel plate bracket off you...

This license plate bracket fits any 3/4" axle, just install the steel plate bracket off your axle, and install your plate! This bracket allows easy...

This high quality shifter peg is CNC'd in California, USA to Thrashin's exact specifications, out of high strength 6061 aluminum. Billet 6061 airc...

This high quality shifter peg is CNC'd in California, USA to Thrashin's exact specifications, out of high strength 6061 aluminum. Billet 6061 airc...

Thrashin Supply P-54 pegs feature a 2.25" wide tapered platform peg for a comfortable amount of grip surface. Grip surface with a slight radius fo...