Chopper Parts

This Fat Bob fender is 7” wide and measures 38” along the top.  It comes undrilled so you can position it as needed on your frame.  The left side h...

Screw-in gas cap for Harley Davidson gas tanks from 1982 - early 1996.  This is a vented cap used on single filler gas tanks, or the right side cap...

Universal 3" round mirror with 4" stem will fit left or right side of stock Harley Davidson controls.  Chrome finish.

Universal 3" round mirror with 4" stem will fit left or right side of stock Harley Davidson controls.  Satin black finish.

3/8" NPT chrome petcock for custom gas tanks with a 3/8" NPT bung.  Outlet is straight and fits 1/4" ID fuel line.   Features: On, off and reserve...

This 5” vintage style raw steel fender is a close reproduction to the original Wassell ribbed fenders of years past.  The sides are edge rolled wit...

Direct replacement for HD part number 62168-81.  Fits stock Harley Davidson motorcycles from 1975-2006 or custom gas tanks with male 22mm bung.  Ou...

Direct replacement for HD part number 62168-81.  Fits stock Harley Davidson motorcycles from 1975-2006 or custom gas tanks with male 22mm bung.  St...

Throttle Addition low bob bars are a great universal bend.  They look great with low risers on classic styled bobbers or raise them up in some tall...

Throttle Addition Hell Diver bars kick forward and slightly up. These bars feature integrated risers spaced 3.5” apart for standard Harley Davidson...

Throttle Addition Speedway bars are low rise bar with integrated risers giving your bike a super clean cockpit. The integrated risers spaced 3.5” a...

If you run your chopper stripped down and minimal then a spool wheel is the obvious choice. You can’t build a spool wheel without a quality polishe...

If you run your chopper stripped down and minimal then a spool wheel is the obvious choice. You can’t build a spool wheel without a quality polishe...

If you run your chopper stripped down and minimal then a spool wheel is the obvious choice. You can’t build a spool wheel without a quality polishe...

These offset dog bone risers are the perfect choice for your classically styled chopper.  The rubber mounts offer a little extra vibration reductio...

These offset dog bone risers are the perfect choice for your classically styled chopper.  The rubber mounts offer a little extra vibration reductio...

This ribbed fender is probably best suited for front wheels, but if you’re running a super skinny rear wheel then this will do the trick.  At 4” wi...

This 6” chrome riser kit includes chrome risers, chrome top clamp and top clamp bolts.  The risers are threaded to accept ½” x 13 TPI bolts which a...

These vintage style cloth wrapped spark plug wires will add a nice accent to your vintage motorcycle.  They feature 7mm solid core copper conductor...

These vintage style cloth wrapped spark plug wires will add a nice accent to your vintage motorcycle.  They feature 7mm solid core copper conductor...

These vintage style cloth wrapped spark plug wires will add a nice accent to your vintage motorcycle.  They feature 7mm solid core copper conductor...

These are a fantastic reproduction of the Flanders model # 35-RM (rubber mount) dog bone style risers for springer forks or custom applications.  T...

Reproduction chrome-plated inline top tree for Harley Davidson springer front ends. This type of clamp is to be used with dog bone style risers. C...

Reproduction zinc-plated inline top tree for Harley Davidson springer front ends. This springer top clamp is to be used with dog bone style risers....

Using this vintage styled cotton braided wire will help finish of your motorcycle project with a touch of class.  If you have to see the wires, use...

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use...

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use...

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use...

Get rid of that stock eyebrow! This is the strongest mount of this style on the market.  Stainless Steel means you can bolt it to your bike directl...

These vintage style cloth wrapped spark plug wires will add a nice accent to your vintage motorcycle.  They feature 7mm solid core copper conductor...

The Dished Wassell Style gas tank is a throwback to sixties show bikes.  The recessed dishing perfectly matches the outside lines of the tank and i...

The dished Wassell style gas tank is a throwback to sixties show bikes.  The recessed dishing perfectly matches the outside lines of the tank and i...

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use...

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use...

Vintage Style Throttle Assembly - Black - Double Cable Our beautifully refined, stripped down motorcycle throttle assembly is a simple, clean and c...

Our beautifully refined, stripped down throttle assembly is a simple fit and cost effective option for your 1” handlebars.   Includes plastic th...

Throttle Addiction 9” vintage ape hangers are the perfect height for a comfortable ride, and the tight clamping area makes them stylish as hell.  T...

This Frisco Sportster gas tank has the classic Sportster shape with the custom features you want.  It has a Frisco bottom low tunnel mount paired w...

These classic motorcycle style risers are die cast steel and chrome-plated.   Designed to work with 1" handlebars. 3" rise  1/2" x 20 TPI threa...

These are a fantastic reproduction of the Flanders model # 55-RM (rubber mount) dog bone style risers for springer forks or custom applications.  T...

This is the bracket if you're looking to run dual headlights on your chopper.  Will require drilling hole in your bottom triple tree, otherwise it ...

 Dimensions: 29" tip to tip 6" wide 13.5" tall

This 40 spoke steel chrome-plated rim is a direct replacement for Harley Davidson part # 43085-81 Specs: 16” X 3.00” Drop center Side valve ...

This 21” wheel utilizes a replica stock Harley hub from Dyna (FX)  and Sportster (XL) models from 1984-1999 and is designed as a replacement for th...

This 21” wheel will fit Dyna (FXD) models from 2000 - 2003 and Sportster (XL) models from 2000 - 2007 and custom applications using a Harley narrow...

This 16" x 3.00 rear wheel is a direct Harley Davidson replacement for all Big Twin and Sportster models from 1979-1999 (except touring models).  T...

Drag style handlebars are a great fit for motorcycles running taller risers.  For an aggressive feel, trim a few inches off each end and narrow the...

Design: Compared to our original Solo seat, the new Solo II has a shorter overall length and two more inches of kick in the tail to deepen the seat...