Gas Tanks & Fuel

Throttle Addiction

Narrow Frisco Sportster Gas Tank

For years, chopper heads have been cutting up and narrowing the classic Harley Sportster tank.  Lowering the tunnel to give it that "Frisco" style was utilized to squeeze every last drop of fuel out.  We've removed all that effort of cutting...

Throttle Addiction

Frisco Sportster Peanut Gas Tank

This classic Sportster gas tank has been set up with a low "Frisco" tunnel to maximize fuel capacity and sit high and stylish on the backbone. Commonly refered to as a Peanut Tank,  It will give your chopper or bobber a custom look but still carry...

Throttle Addiction

Stock Sportster Gas Tank Shell

This Sportster gas tank shell is a great start to a custom gas tank fabrication project. This is the same size as the stock Sportster shells of the '90s and early 2000 models. Don’t waste your time cutting up an old Harley Sportster tank. ...

Throttle Addiction

Custom Frisco Sporty Gas Tank

This Frisco Sportster gas tank has the classic Sportster shape with the custom features you want.  It has a Frisco bottom low tunnel mount paired with an offset gas cap and rear petcock bung for max fuel capacity.  We also took the time to...

Throttle Addiction

Narrow Sportster Tank Shell

This single piece stamped shell is the same one used to construct our narrow sporty gas tank.  If you are looking to put your own touch on a narrow Sportster style tank, this is a great start that is certain to save you time. Features: Single...

Throttle Addiction

Mini Sportster Gas Tank

If you want small and compact, this is your gas tank.  It is the smallest, most stylish gas tank on the market! Features: Single 1/4" NPT petcock bung on left side of tank Undrilled mounting tabs Single piece stamped top shell Single piece stamped...

Universal Cycle

Cam Style Harley Davidson Gas Cap - Gloss Black - Vented

This vented gloss black cam or bayonet-style gas cap fits Harley Davidson gas tanks from 1936-1982 and most of the custom gas tanks sold by Throttle Addiction. Features: Gloss black Steel construction with rubber gasket

Throttle Addiction

Pinched Sportster Tank Shell

This single piece stamped Sportster gas tank shell is the same one used to construct our Custom Frisco Sporty gas tank.  If you are looking to weld up your own custom Sportster style tank, this is a great start that is certain to save you time...

Universal Cycle

Stock Sportster Gas Tank 1995-2003

This gas tank is a stock replacement for Harley Davidson Sportsters from years 1995-2003.  Constructed from 18 gauge steel, it is thicker than stock Harley tanks.  Mounting hardware and rubber bushing are not included. Petcock bung available on...

Universal Cycle

Cam Style Harley Davidson Gas Cap - Matte Black - Vented

This vented cam or bayonet-style gas cap fits Harley Davidson gas tanks from 1936-1982 and most of the custom gas tanks we sell. Features: Matte black Steel construction with rubber gasket

Super Narrow Sporty XL Gas Tank

This super narrow Sportster tank is a perfect addition to our line of custom tanks. Its slimmer lines add custom style to a traditional design.  Offset bung Single 1/4” NPT petcock fitting 1.6 gallon Dimensions: 14" L x 7.5" W x...

Universal Cycle

Stock Sportster Gas Tank 1982-1994

This gas tank is a stock replacement for Harley Davidson Sportsters from years 1982-1994.  Constructed from 18 gauge steel it is thicker than stock Harley tanks.  Mounting hardware and rubber bushing are not included.  Left side petcock...

Universal Cycle

Indented Frisco Sportster Gas Tank

This custom indented Sporty is a great fit for your slick chopper or bobber.  The indented scalloped sides add depth to the tank sides.  The Frisco tunnel keeps the tank sitting high and the hidden mounts preserve the clean lines.  Mounts...

Universal Cycle

EFI Sportster Gas Tank - 2007-Later

This Sportster gas tank with fit electronic fuel injected (EFI) models 2007-Later.  It is a direct bolt-on tank requiring no modifications.  The tank has a 2.2 gal capacity and is the same size and style as the Harley Sportster Forty-Eight...

Throttle Addiction

2007-UP EFI Frisco Sporty Tank

This Frisco Sportster tank is a direct bolt on for 2007 and up Sportsters which use electronic fuel injection (EFI).  The custom tank will use the stock fuel pump and gas cap and is a direct bolt on part.  No drilling, welding or fabrication of...

Universal Cycle

King Sportster Gas Tank 1979-1981

King Sportster gas tank holds 3.1 gallons and is approximately 2" wider than stock tanks. Tank dimensions are 17 1/2" length x 10 3/4" width. Fits Sportster 1979-1981. Requires cam style vented gas cap Requires 22mm petcock Note: These...

Gasbox

Gasbox - Sportster Gas Tank Lift Kit - 1986-2003

Super well-made lift kit - the best you'll find. Simply remove your tank's front mount hardware, slide this bracket in and using your stock hardware and the additional hardware included bolt the tank back on. This raises the front of the tank several...

Throttle Addiction

Straight 1/8 NPT x 3/8" Hose Barb Fitting - Brass

Brass 3/8" NPT X 3/8" ID hose straight fitting. 

Harley Sportster Gas Tank 1958-1978

Harley Sportster Gas Tank 1958-1978 - Throttle Addiction - Raw - Unfinished.  This gas tank is a stock replacement for Harley Davidson Sportsters from years 1958-1978.  Constructed from 18 gauge steel, it is thicker than stock Harley tanks...

Pop Up Gas Cap - Black

Pop-Up Screw-in Smooth Gas Caps in smooth vented black.  Includes multiple gaskets for fitment options Fitment: 1996-UP HD (except 2004-2006 XL)

Pop Up Gas Cap - Chrome

Pop-Up Screw-in Smooth Gas Cap Vented in chrome Includes 2 gaskets for fitment options Fitment: 1996-UP HD (except 2004-2006 XL)

Mid USA

3.1 Gallon King Sportster Gas Tank 1982-2003

Larger King Sportster style gas tank for early evolution Sportsters.  Uses later screw in style gas cap.  Approximately 2" wider than the stock gas tank.   Details: 1982 through 2003 3.1 gallon tank Tunnel 31-/2" high x 2" wide Tank...

Wyatt Gatling

Prism Chopper Gas Tank

This classic Prism style chopper gas tank is the perfect fit for a long raked out vintage motorcycle.  It features a multi angle design and shallow tunnel leaving most of the motor exposed.  The front of the tank has a single D tab for...