Frame & Chassis

Throttle Addiction

Deluxe Evolution Sportster Hardtail Kit 1982-2003

This weld on Sportster hard tail kit will transform you stock swing arm evolution Sportster into a hard tail chopper in minimal time.  This Kit was original designed and manufactured by the Haifley Bros in Phoenix Arizona.  Throttle Addiction...

Universal Cycle

Narrow Glide Sportster Fairing

This custom fairing is designed to fit narrow glide Harley Davidson front ends using visor mount 5 3/4" headlight.  It is ready to run as-is or can be sanded and painted.  This is a quick 10-minute install for a drastic style change on your...

Hardtail Sissybar - Tall

These hardtail sissy bars designed for use with our Evo Sportster Hardtail Kit, and 5" flat fender, but can fit on most hardtail frames.  Sissy bars are TIG welded and ready for installation. Constructed of 9/16" round stock with 1/4'" fender...

Throttle Addiction

Evolution Sportster Hardtail 1982-2003

Throttle Addiction is excited to announce that we have purchased all assets and rights to production for the Haifley Bros line of sportster hardtail kits and motorcycle parts.  We will continue producing these parts at the highest quality using the...

Throttle Addiction

DIY Hardtail Sissy Bar Kit - Tall

These DIY hardtail sissy bar kits are designed for use with our Evo Sportster Hardtail Kit, and 5" flat fender, but can fit on most hardtail frames.  Constructed of 9/16" round stock with 1/4'" fender strap and mounting tabs. 9" wide between...

Throttle Addiction

Sportster Bolt On Sissy Bar - 1994-2003 - Tall

Tall bolt on sissy bars for Sportster models are made in the USA at Throttle Addiction. These are made form 9/16" round stock, feature 1/4" thick mounting plates and are 100% TIG welded. They sit roughly 23" above the top of the fender.  This...

Throttle Addiction

Ironhead Sportster Top Motor Mount 1955-1977

Chrome Ironhead Sportster top motor mount.  Fits Sportster 1957-1977.  Includes holes to mount the coil.    

TC Bros Choppers

Weld On Motorcycle Kickstand - Chrome

This custom weld-on kickstand is a great option for a ground up motorcycle build.  The sleek design features an internal spring and ball system to keep the kickstand in the up or down position and improves ground clearance over exterior spring...

Throttle Addiction

Sportster Hardtail Battery Tray/Hold Down

Battery tray and hold down designed to secure an Antigravity 12 cell small case battery for use with our Evolution Sportster Hardtail Kit. This weld-on battery tray and hold down mounts to the backside of the seat down tube, allowing the...

Throttle Addiction

Ironhead Sportster Top Motor Mount 1955-1977 with ignition switch mount

Chrome Ironhead Sportster top motor mount.  Fits Sportster 1957-1977.  Includes holes to mount the coil and hole to mont ignition switch.     

Hardtail Sissybar - Short

These hardtail sissy bars designed for use with our Evo Sportster Hardtail Kit, and 5" flat fender, but can fit on most hardtail frames.  Sissy bars are TIG welded and ready for installation. Constructed of 9/16" round stock with 1/4'" fender...

Throttle Addiction

Sportster Bolt On Sissy Bar With Stock Blinkers - 1994-2003 - Tall

Tall bolt on sissy bars for Sportster models are made in the USA at Throttle Addiction. These are made form 9/16" round stock, feature 1/4" thick mounting plates and are 100% TIG welded. They sit roughly 23" above the top of the fender.  This...

Throttle Addiction

Sportster Bolt On Sissy Bar - 1994-2003 - 12" tall

Bolt on short 12" tall sissy bar designed to fit 1994 - 2003 Sportster models.  This is a raw steel sissy bar so you can powder coat, chrome or rattle can it to your liking.  These sissy bars mount on the front fender mount and the hole where...

Sportster Short Bolt On Sissybar - 1994-2003

Bolt on short sissy bar designed to fit 1994 - 2003 Sportster models.  This is a raw steel sissy bar so you can powdercoat, chrome or rattle can it to your liking.   Sissy bar sits roughly 14" above the top of the fender.  Constructed...

Throttle Addiction

Sportster Bolt On Sissy Bar With Stock Blinkers - 1994-2003 - Short

Short bolt on sissy bars for Sportster models are made in the USA at Throttle Addiction. These are made form 9/16" round stock, feature 1/4" thick mounting plates and are 100% TIG welded. They sit roughly 13" above the top of the fender.  This...

Ricky Bongos

Ricky Bongos - Sportster 1986-2003 Motor Mount - Vivid Black

Ricky Bongos made in the USA top motor mount for 1986-2003 Sportsters.  Clean up your ride and support American manufacturing all in one. Powdercoated Black. Made in the USA.

Ricky Bongos - Sportster 1986-2003 Motor Mount with Key - Chrome

Ricky Bongos made in the USA top motor mount for 1986-2003 Sportsters.  This mount features a place to relocate your stock ignition switch and mount your coil.  Clean up your ride and support American manufacturing all in one. Chrome plated...

Ricky Bongos

Ricky Bongos - Sportster 1986-2003 Motor Mount with Key - Vivid Black

Ricky Bongos made in the USA top motor mount for 1986-2003 Sportsters.  This mount features a place to relocate your stock ignition switch and mount your coil.  Clean up your ride and support American manufacturing all in one. Powdercoated...

Speed Merchant

Speed Merchant - Skid Plate Harley Sportster 2004-2018 - Black

This aluminum skid plate was designed just for your Sportster. Handmade in sunny California by the Speed Merchant crew. Includes the necessary mounting hardware. YEARMAKEMODEL 2014 - 2017 Harley-Davidson Superlow - XL 1200T 2004 - 2006...

Speed Merchant

Speed Merchant - Skid Plate Harley Sportster 2004-2018 - Brushed Aluminum

This aluminum skid plate was designed just for your Sportster. Handmade in sunny California by the Speed Merchant crew. Includes the necessary mounting hardware. YEARMAKEMODEL 2014 - 2017 Harley-Davidson Superlow - XL 1200T 2004 - 2006...