Suspension

Mid USA

Vintage Harley Big Twin Style Springer Front End - Black and Chrome

Vintage style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes chrome top clamp and 3/4" axle kit. Fully assembled with in-line top clamp – 0 degree rake 1” O.D...

Mid USA

Vintage Harley Big Twin Style Springer Front End - Chrome

Vintage style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes chrome top clamp and 3/4" axle kit. Fully assembled with in-line top clamp – 0 degree rake 1” O.D...

Universal Cycle

Black 39mm Fork Boots - Sportster / Dyna

6 3/4" Black Rubber Boots that fit 39mm forks on FXD Dyna & XL Sportster Model Harleys.  Books keep your sliders clean from road grime and just look cool! Sold in pairs and includes mounting zip ties.    

Springer Riser Stud 1/2" X 13 Thread

This pair of riser studs is 1/2" X 13 TPI thread inner diameter.  Outside Threads match stock OEM FXST Springers, External Threads: 5/8" x 18.  These will not work on most aftermarket springers. These riser studs will allow you to install most...

Universal Cycle

Springer Top Clamp Handle Bar Adapter for 3.5" Center

Springer front end adapter plate allows you to run 3.5" spaced riserless handlebars or use non-springer risers with your springer front end.  The plate bolts to the 4.75" spaced bolts on the springer legs, and the second set of 3.5" spaced mounting...

Throttle Addiction

Stelling and Hellings Springer Top Clamp - Narrowed

If you have been looking for options to run narrow handlebars on your early OEM style springer look no further. This Hellings and Stellings Style Narrow Top Tree for Inline OEM Harley style springer front ends. These are perfect if you want to...

Universal Cycle

Springer Fork Top Clamp For Post Risers - Chrome

Inline springer fork top triple tree with 1/2" mount holes for mounting post style/ bolt on risers.  It's constructed of cast steel and is chrome-plated.Inline top triple tree fits stock or custom spring forks. 1/2" holes allow post risers to be...

Throttle Addiction

Springer Riser Studs 1/2" X 13 to 1/2 X 20 - Stainless

Springer riser studs for mounting standard risers with an aftermarket springer. Most aftermarket springers are 1/2" X 20 thread, this allows you use risers that are threaded 1/2" X 13. 1/2" X 13 to 1/2 X 20. Made in the USA Stainless...

Sportster / Dyna 39mm Fork Slider Rebuild Seal Kit

This complete kit includes all parts needed for a complete rebuild of one set of 39mm front fork leg assemblies commonly found on Sportstser and Dyna front ends. The fork rebuild kit includes bushings, seals, o-rings, dust cover gaskets and clips...

Harddrive Parts

39mm Extended Fork Tubes for Sportster / Dyna Narrow Glide - Hard Chrome - Various Lengths

These replacement and extended 39mm fork tubes fit Harley Evolution Sportster and Dyna Narrow Glide front ends. They feature a hard chrome finish and are sold in pairs. When replacing fork tubes it is best to replace all seals and bushings with a fork...

VTwin MFG

Springer Riser Stud Kit

Replace those worn our riser bushings in your factory late model Harley Davidson Springer risers. Springer handlebar riser stud kit includes studs and poly ISO bushing set for a firmer riser mount. Height: 3-5/8" Fits:FXSTS 1988-2006 

Throttle Addiction

Narrow 41mm Hydra Glide Triple Tree Set

These Throttle Addiction Custom Narrow Hydra-Glide 41mm triples trees with shave inches off your front end width.  Throttle Addiction acquired this product design and production rights from Visionary Cycle Products in early 2021. These are 3"...

Universal Cycle

Inline Springer Top Clamp - Dog Bone Style - Chrome

Reproduction chrome-plated inline top tree for Harley Davidson springer front ends. This type of clamp is to be used with dog bone style risers. Center to Center: 4-7/8" Diameter: 1" Center Hole I.D.: 1-5/16" Height: 1-3/16" Fork Hole I.D.:...

Colony

Harley Triple Tree Steering Stem Nut With Lock Washer - 1960 - UP Harley Davidson FL, FLH

Colony Steering Stem Nut/Lockwasher Kit Precision-machined stock stem nut and stamped steel lock washer For models without steering damper Made in the U.S.A. Zink Plated Colony part # 3050-2 Fits- Throttle Addiction Hydra Glide triple...

Universal Cycle

Inline Springer Top Clamp - Dog Bone Style - Zinc Plated

Reproduction zinc-plated inline top tree for Harley Davidson springer front ends. This springer top clamp is to be used with dog bone style risers. • Fits Harley 1936-1940 EL Models• Fits Harley 1941-1945 FL Models• Fits Harley 1929-1952...

Mid USA

Vintage Harley Big Twin Style Springer Front End - Black

Vintage style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes chrome top clamp and 3/4" axle kit. Fully assembled with in-line top bracket without built in rake (0 degree...

Custom Cycle Engineering

39mm Extended Fork Tubes for Sportster / Dyna Narrow Glide 6 in. Over 30.25"

These Custom Cycle Engineering 39mm hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 Sportster XL (EX 00-05 FXDX, FXDXT) 30.25" in length, 6" over stock length Show chrome finish Made in the...

Mid USA

Vintage Style Springer Front End - Black and Copper

This Vintage style Black and copper springer front end will make your chopper or bobber build stand out from the rest. Replicated after the Harley Davidson Big Twin springer, it boast vintage motorcycle styling, yet incorporates modern upgrades. Fully...

Harley 39 mm Fork Tube Extensions - 3"

These 39 mm Fork Tube Extensions are a quick easy solution to adding a little length to your front end.  Extends 3" Made from stainless steel Extends all 39 mm fork tubes Perfect when installing 23" and 26" front wheels, or to raise the bike...

Mid USA

OEM Style Inline Harley Knucklehead Springer Front End - Black

Vintage inline Knucklehead / Panhead style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes axle kit. This reproduction FL springer has the drum brake stay on the correct left...

Custom Cycle Engineering

39mm Fork Tubes for Sportster / Dyna Narrow Glide Stock Length 24.25"

These Custom Cycle Engineering 39mm hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 Sportster XL (EX 00-05 FXDX, FXDXT) 24.25" in length - stock length Direct OEM replacement #45360-90 Show...

Mid USA

Springer Front End - Chrome

This custom chrome springer front end for Harley and custom frames will set your ride off and give it that vintage look.  They feature machined lower triple trees and full length forged rear legs. The springer includes the axle, spacers and top...

Mid USA

Springer Front End - Black

This custom black springer front end for Harley and custom frames will set your ride off and give it that vintage look.  They feature machined lower triple trees and full length forged rear legs. The springer includes the axle, spacers and top clamp...

Custom Cycle Engineering

39mm Extended Fork Tubes for Sportster / Dyna Narrow Glide 4 in. Over 28.25"

These Custom Cycle Engineering extended 39mm hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 Sportster XL (EX 00-05 FXDX, FXDXT) 28.25" in length, 4" over stock length Show chrome finish Made...

Throttle Addiction

Stelling and Hellings Inline springer Top Clamp and Riser Set - Bronze - Narrowed

This is a complete set consisting of a Throttle Addiction bronze narrowed springer top clamp for OEM 1936-1946 Harley style springer front ends and most aftermarket reproduction front ends and 1 set of Throttle Addiction Stellings and Hellings style...

Speed Merchant

Speed Merchant - 49mm Fork Preload Adjusters - Gold

These adjusters will replace your stock fork caps and allow you to fine tune your front suspension, with almost an inch of preload adjustment. Easily dial in your front-end preload without having to remove the stock caps and cutting spaces, with a turn...

Custom Cycle Engineering

Extended 49mm Fork Tubes 33.50" For Harley 2006-2017 - Show Chrome

If your stock upper tubes are pitted and worn out or if you are going to play chopper, you need new fork tubes! Custom Cycle Engineering offers their high quality tubes in two finishes and a whole variety of lengths, so if you're looking for a quality...

Custom Cycle Engineering

39mm Extended Fork Tubes for Sportster / Dyna Narrow Glide 2 in. Over 26.25"

These Custom Cycle Engineering extended 39mm hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 Sportster XL (EX 00-05 FXDX, FXDXT) 26.25" in length, 2" over stock length Show chrome finish Made...

Drag Specialties

Fork Slider Rebuild Seal Kit - 35 mm - '84-'87

Fork Slider Rebuild Kit - 35 mm - '84-'87 35mm Includes all parts needed for complete rebuild of front fork leg assemblies - does not include bushings or damper bolts.  84-85 XL 85-86 FX/FXR

Harley 39 mm Fork Tube Extensions - 2"

These 39 mm Fork Tube Extensions are a quick easy solution to adding a little length to your front end.  Extends 2" Made from stainless steel Extends all 39 mm fork tubes Perfect when installing 23" and 26" front wheels, or to raise the bike...

Pangea Speed

Pangea Speed - 41mm Narrow Axle - 091

This axle is designed to work with our 41mm narrow glide trees or any trees that are around 7in on center and the early style Panhead/gen shovel tapered sliders. This Axle is machined from stainless steel so rust is not an issue. This axle is 3/4 (.75in)...

Speed Merchant

Speed Merchant - 49mm Elite Triple Trees 2006-2017 Dyna - Black

Speed Merchant 49mm elite triple trees Fits: 2006-2017 Harley Dyna models (Excludes Fat Bob and Wide Glide) CNC machined out of 6061 aluminum Available in black anodized finish or polished finish Includes steering stem and external hardware for use...

Pangea Speed

Pangea Speed - 41mm Narrow Trees

These trees take styling cues from the original Hydra-Glide front ends but have a bit of their own unique flare as well.  They are stock narrow glide width (7in on center) which allows you to have a custom look while still running a front brake...

Harley 39 mm Fork Tube Extensions - 1"

These 39 mm Fork Tube Extensions are a quick easy solution to adding a little length to your front end.  Extends 1" Made from stainless steel Extends all 39 mm fork tubes Perfect when installing 23" and 26" front wheels, or to raise the bike...

Throttle Addiction

Stelling and Hellings Inline springer Top Clamp and Riser Set - Standard Width

This is a complete set consisting of a Throttle Addiction standard width springer top clamp for OEM 1936-1946 Harley style springer front ends and most aftermarket reproduction front ends and 1 set of Throttle Addiction Stellings and Hellings style...

Mid USA

Springer Front End - Black and Copper

This custom black and copper springer front end for Harley and custom frames will set your ride off and give it that vintage look.  one inch front rails on all lengths Fully assembled with a forged in-line top bracket without a...