Throttle Addiction Deluxe Evolution Sportster Hardtail Kit 1982-2003 MSRP: Was: Now: $1,299.99 - $1,699.98 Choose Options
Throttle Addiction Panhead / Shovelhead Weld-On Hardtail With Cast Axle Plates MSRP: Was: Now: $699.99 - $729.98 Out of Stock
Sale Throttle Addiction Evolution Sportster Hardtail 1982-2003 MSRP: Was: $499.99 Now: $399.95 - $429.94 Choose Options
Throttle Addiction DIY Hardtail Sissy Bar Kit - Tall MSRP: Was: Now: $109.99 - $124.99 Choose Options
Sale Throttle Addiction Sportster Direct Bolt On Sissy Bar - 1994-2003 - 23" MSRP: Was: $129.95 Now: $99.99 Add to Cart
Drag Specialties Neck Bearing and Race Replacement Kit - Big Twin & Sportster MSRP: Was: Now: $26.95 Add to Cart
Drag Specialties Big Twin & Sportster Fork Stem Dust Covers - Chrome MSRP: Was: Now: $10.95 Add to Cart
Speed Merchant Speed Merchant - Skid Plate Harley Dyna 2006-2017 - Black MSRP: Was: Now: $255.95 Add to Cart
Mid USA Big Twin Fork Bearing Neck Cup Kit With Internal Stop - Chrome MSRP: Was: Now: $146.90 Out of Stock
Speed Merchant Speed Merchant - Skid Plate Harley Dyna 1991-2005 - Black MSRP: Was: Now: $255.95 Add to Cart
Speed Merchant Speed Merchant - Skid Plate Harley Dyna 2006-2017 - Brushed Aluminum MSRP: Was: Now: $234.95 Add to Cart
Speed Merchant Speed Merchant - Skid Plate Harley Sportster 2004-2018 - Brushed Aluminum MSRP: Was: Now: $214.95 Add to Cart
Speed Merchant Speed Merchant - Skid Plate Harley Dyna 1991-2005 - Brushed Aluminum MSRP: Was: Now: $234.95 Add to Cart
Throttle Addiction Frisco Sportster Peanut Gas Tank This classic Sportster gas tank has been set up with a low "Frisco" tunnel to maximize fuel capacity and sit high and stylish on the backbone. Commonly refered to as a Peanut Tank, It will give your chopper or bobber a custom look but still carry... MSRP: Was: Now: $149.99 Out of Stock
Throttle Addiction Deluxe Evolution Sportster Hardtail Kit 1982-2003 Our Throttle Addiction weld on Sportster hard tail kit will transform you stock swing arm Sportster into a hard tail chopper in minimal time. The hardtail kit is designed to fit 1982-2003 Harley Davidson Sportsters. It is constructed from 1-1/4" ... MSRP: Was: Now: $1,299.99 - $1,699.98 Choose Options
Throttle Addiction Panhead / Shovelhead Weld-On Hardtail With Cast Axle Plates Throttle Addiction weld on hardtail mates beautifully to all Harley Davidson Panhead and Shovelhead swing arm frames from years 1958-1985. The kit accurately recreates Panhead hardtail frame dimensions and styling. The Shovelhead... MSRP: Was: Now: $699.99 - $729.98 Out of Stock
Hardtail Sissy Bar - Tall These hardtail sissy bars designed for use with our Evo Sportster Hardtail Kit, and 5" flat fender, but can fit on most hardtail frames. Sissy bars are TIG welded and ready for installation. Constructed of 9/16" round stock with 1/4'" fender... MSRP: Was: Now: $169.99 Add to Cart
Universal Cycle Big Twin Fork Bearing Neck Cup Kit - Chrome High quality fork cup and bearing kit. • Fits 1949 - '88 Big Twin models as well as most custom frames. • Kit includes: chrome bearings, neck cups and races. Replaces HD 48315-60, 48311-60 and 48300-60 MSRP: Was: Now: $46.95 Out of Stock
Sale Throttle Addiction Evolution Sportster Hardtail 1982-2003 This Sportster hardtail kit is designed to fit 1982-2003 Harley Davidson Sportster models. This is a basic evolution Sportster hard tail kit to convert a stock swing-arm Sportster into a rigid framed motorcycle with a 2" stretch. Features include solid... MSRP: Was: $499.99 Now: $399.95 - $429.94 Choose Options
Throttle Addiction DIY Hardtail Sissy Bar Kit - Tall These DIY hardtail sissy bar kits are designed for use with our Evo Sportster Hardtail Kit, and 5" flat fender, but can fit on most hardtail frames. Constructed of 9/16" round stock with 1/4'" fender strap and mounting tabs. 9" wide between... MSRP: Was: Now: $109.99 - $124.99 Choose Options
Sale Throttle Addiction Sportster Direct Bolt On Sissy Bar - 1994-2003 - 23" Tall bolt on sissy bars for Sportster models are made in the USA at Throttle Addiction. These are made form 9/16" round stock, feature 1/4" thick mounting plates and are 100% TIG welded. They sit roughly 23" above the top of the fender. This... MSRP: Was: $129.95 Now: $99.99 Add to Cart
Drag Specialties Neck Bearing and Race Replacement Kit - Big Twin & Sportster Neck Bearing and Race Complete Replacement Kit - Big Twin & Sportster Includes two bearings, two races and two dust seals Replaces OEM 4830060 4831560 Fitment 82-21 XL (EXCEPT 21 SPORTSTER S/RH1250S) 02-17 V-ROD 84-17... MSRP: Was: Now: $26.95 Add to Cart
Mid USA Weld On Motorcycle Kickstand - Chrome This custom weld-on kickstand is a great option for a ground up motorcycle build. The sleek design features an internal spring and ball system to keep the kickstand in the up or down position and improves ground clearance over exterior spring... MSRP: Was: Now: $74.99 Choose Options
Weld On Juice Brake Anchor Tab Weld this bad boy on our shovelhead hardtail to allow the use of a juice drum brake. MSRP: Was: Now: $34.99 Add to Cart
Pangea Speed Pangea Speed - Upper Fender Mounting Kit - 139 includes mounting tab, 2 threaded bungs, 2 washers, and two bolts. mild steel MSRP: Was: Now: $39.99 Add to Cart
Hardtail Sissy Bar - Short These hardtail sissy bars designed for use with our Evo Sportster Hardtail Kit, and 5" flat fender, but can fit on most hardtail frames. Sissy bars are TIG welded and ready for installation. Constructed of 9/16" round stock with 1/4'" fender... MSRP: Was: Now: $169.99 Add to Cart
Pangea Speed Pangea Speed - Chopper Fender Mount - 137 Thisis a 16g steel mounting bracket that you can weld to the lower part of your fender when running a chopper fender on a big twin rigid frame. This mount is designed to match the style of the factory frame mount. long enough to trim to fit and cover a... MSRP: Was: Now: $15.99 Add to Cart
Drag Specialties Big Twin & Sportster Fork Stem Dust Covers - Chrome Big Twin & Sportster Fork Stem Dust Covers - Chrome Upper and lower set of zinc-plated dust covers For use with Timken bearings Replaces OEM part numbers 4836180 4836548 4836548A 4836548B 4836548C Fitment 66-17 Big... MSRP: Was: Now: $10.95 Add to Cart
Mid USA Weld On Motorcycle Kickstand - 1.25" - Black This custom weld-on kickstand is a great option for a ground up motorcycle build. The sleek design features an internal spring and ball system to keep the kickstand in the up or down position and improves ground clearance over exterior spring... MSRP: Was: Now: $74.99 Out of Stock
Speed Merchant Speed Merchant - Skid Plate Harley Dyna 2006-2017 - Black Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '06-'17 Dyna models Hand-made from aluminum in the USA Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or... MSRP: Was: Now: $255.95 Add to Cart
Mid USA Big Twin Fork Bearing Neck Cup Kit With Internal Stop - Chrome Big Twin Fork Bearing Neck Cup Kit With Internal Stop - Chrome Requires a flat style lower fork bracket (like shown under additional images) suitable for installing the stop plate The stop plate can be installed to provide a 70° swing or a... MSRP: Was: Now: $146.90 Out of Stock
Speed Merchant Speed Merchant - Skid Plate Harley Dyna 1991-2005 - Black Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '91-'05 Dyna models Hand-made from aluminum Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or welding Mounting... MSRP: Was: Now: $255.95 Add to Cart
Mid USA Weld On Motorcycle Kickstand - 1.125" - Black This custom weld-on kickstand is a great option for a ground up motorcycle build. The sleek design features an internal spring and ball system to keep the kickstand in the up or down position and improves ground clearance over exterior spring... MSRP: Was: Now: $74.99 Out of Stock
Speed Merchant Speed Merchant - Skid Plate Harley Dyna 2006-2017 - Brushed Aluminum Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '06-'17 Dyna models Hand-made from aluminum in the USA Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or... MSRP: Was: Now: $234.95 Add to Cart
Speed Merchant Speed Merchant - Skid Plate Harley Sportster 2004-2018 - Brushed Aluminum This aluminum skid plate was designed just for your Sportster. Handmade in sunny California by the Speed Merchant crew. Includes the necessary mounting hardware. YEARMAKEMODEL 2014 - 2017 Harley-Davidson Superlow - XL 1200T 2004 - 2006... MSRP: Was: Now: $214.95 Add to Cart
Speed Merchant Speed Merchant - Skid Plate Harley Dyna 1991-2005 - Brushed Aluminum Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '91-'05 Dyna models Hand-made from aluminum Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or welding Mounting... MSRP: Was: Now: $234.95 Add to Cart