Fork

Mid USA

Vintage Harley Big Twin Style Springer Front End - Black and Chrome

Vintage style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes chrome top clamp and 3/4" axle kit. Fully assembled with in-line top clamp – 0 degree rake 1” O.D...

Mid USA

Vintage Harley Big Twin Style Springer Front End - Chrome

Vintage style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes chrome top clamp and 3/4" axle kit. Fully assembled with in-line top clamp – 0 degree rake 1” O.D...

Universal Cycle

Black 39mm Fork Boots - Sportster / Dyna

6 3/4" Black Rubber Boots that fit 39mm forks on FXD Dyna & XL Sportster Model Harleys.  Books keep your sliders clean from road grime and just look cool! Sold in pairs and includes mounting zip ties.    

Universal Cycle

49mm Top Triple Tree Clamp - 2006-2017 Dyna FXD , Street Bob Replacement

This 49mm upper triple tree is a great replacement for those in possession of the Harley Street Bob.   In the MoCo's infinite wisdom, they produced this model with a triple tree featuring integrated risers.  Replacing that top clamp with...

Springer Riser Stud 1/2" X 13 Thread

This pair of riser studs is 1/2" X 13 TPI thread inner diameter.  Outside Threads match stock OEM FXST Springers, External Threads: 5/8" x 18.  These will not work on most aftermarket springers. These riser studs will allow you to install most...

Universal Cycle

Springer Top Clamp Handle Bar Adapter for 3.5" Center

Springer front end adapter plate allows you to run 3.5" spaced riserless handlebars or use non-springer risers with your springer front end.  The plate bolts to the 4.75" spaced bolts on the springer legs, and the second set of 3.5" spaced mounting...

Universal Cycle

Springer Fork Top Clamp For Post Risers - Chrome

Inline springer fork top triple tree with 1/2" mount holes for mounting post style/ bolt on risers.  It's constructed of cast steel and is chrome-plated.Inline top triple tree fits stock or custom spring forks. 1/2" holes allow post risers to be...

Harddrive Parts

35mm Fork Tubes For Ironhead / Shovelhead - Hard Chrome - Various Lengths

35mm fork tubes for Harley Ironhead Sportster and Harley Shovelhead fork tubes are hard chrome finish and available in extended, standard or shortened length. Sold in pairs. available in 2" increments from 8" over to 2" under stock length...

Throttle Addiction

Springer Riser Studs 1/2" X 13 to 1/2 X 20 - Stainless

Springer riser studs for mounting standard risers with an aftermarket springer. Most aftermarket springers are 1/2" X 20 thread, this allows you use risers that are threaded 1/2" X 13. 1/2" X 13 to 1/2 X 20. Made in the USA Stainless...

Harddrive Parts

39mm Extended Fork Tubes for Sportster / Dyna Narrow Glide - Hard Chrome - Various Lengths

These replacement and extended 39mm fork tubes fit Harley Evolution Sportster and Dyna Narrow Glide front ends. They feature a hard chrome finish and are sold in pairs. When replacing fork tubes it is best to replace all seals and bushings with a fork...

VTwin MFG

Springer Riser Stud Kit

Replace those worn our riser bushings in your factory late model Harley Davidson Springer risers. Springer handlebar riser stud kit includes studs and poly ISO bushing set for a firmer riser mount. Height: 3-5/8" Fits:FXSTS 1988-2006 

Throttle Addiction

Narrow 41mm Hydra Glide Triple Tree Set

These Throttle Addiction Custom Narrow Hydra-Glide 41mm triples trees with shave inches off your front end width.  Throttle Addiction acquired this product design and production rights from Visionary Cycle Products in early 2021. These are 3"...

Universal Cycle

Inline Springer Top Clamp - Dog Bone Style - Chrome

Reproduction chrome-plated inline top tree for Harley Davidson springer front ends. This type of clamp is to be used with dog bone style risers. Center to Center: 4-7/8" Diameter: 1" Center Hole I.D.: 1-5/16" Height: 1-3/16" Fork Hole I.D.:...

Colony

Harley Triple Tree Steering Stem Nut With Lock Washer - 1960 - UP Harley Davidson FL, FLH

Colony Steering Stem Nut/Lockwasher Kit Precision-machined stock stem nut and stamped steel lock washer For models without steering damper Made in the U.S.A. Zink Plated Colony part # 3050-2 Fits- Throttle Addiction Hydra Glide triple...

Universal Cycle

Inline Springer Top Clamp - Dog Bone Style - Zinc Plated

Reproduction zinc-plated inline top tree for Harley Davidson springer front ends. This springer top clamp is to be used with dog bone style risers. • Fits Harley 1936-1940 EL Models• Fits Harley 1941-1945 FL Models• Fits Harley 1929-1952...

Mid USA

Vintage Harley Big Twin Style Springer Front End - Black

Vintage style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes chrome top clamp and 3/4" axle kit. Fully assembled with in-line top bracket without built in rake (0 degree...

Mid USA

Vintage Style Springer Front End - Black and Copper

This Vintage style Black and copper springer front end will make your chopper or bobber build stand out from the rest. Replicated after the Harley Davidson Big Twin springer, it boast vintage motorcycle styling, yet incorporates modern upgrades. Fully...

Mid USA

OEM Style Inline Harley Knucklehead Springer Front End - Black

Vintage inline Knucklehead / Panhead style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes axle kit. This reproduction FL springer has the drum brake stay on the correct left...

Mid USA

Springer Front End - Chrome

This custom chrome springer front end for Harley and custom frames will set your ride off and give it that vintage look.  They feature machined lower triple trees and full length forged rear legs. The springer includes the axle, spacers and top...

Mid USA

Springer Front End - Black

This custom black springer front end for Harley and custom frames will set your ride off and give it that vintage look.  They feature machined lower triple trees and full length forged rear legs. The springer includes the axle, spacers and top clamp...

Throttle Addiction

Stelling and Hellings Springer Top Clamp - Bronze - Narrowed

If you have been looking for options to run narrow handlebars on your early OEM style springer look no further. This Hellings and Stellings Style Narrow Top Tree for Inline OEM Harley style springer front ends. These are perfect if you want to...

Custom Cycle Engineering

Extended 49mm Fork Tubes 33.50" For Harley 2006-2017 - Show Chrome

If your stock upper tubes are pitted and worn out or if you are going to play chopper, you need new fork tubes! Custom Cycle Engineering offers their high quality tubes in two finishes and a whole variety of lengths, so if you're looking for a quality...

Universal Cycle

39mm Front End Lowering Kit Sportster / Dyna 1987- Later

This complete kit will lower your 39mm Harley Sportster or Dyna Narrow Glide front end by up to 2".  The kit includes easy-to-follow instructions and can be completed with out removing the fork tubes from the lower legs.   Designed to fit all...