Frame & Chassis

Universal Cycle

T-Sport Fairing - Gloss Black - Smoke lens

This T-Sport fairing is the perfect solution to style AND wind protection, cutting down on bug snacks and allowing you to ride comfortably. It's designed for direct fitment on 2006+ Dyna using the riser bolts and the bottom triple tree mounted headlight,...

Universal Cycle

Big Twin Fork Bearing Neck Cup Kit - Chrome

High quality fork cup and bearing kit. • Fits 1949 - '88 Big Twin models as well as most custom frames. • Kit includes: chrome bearings, neck cups and races. Replaces HD 48315-60, 48311-60 and 48300-60  

VTwin MFG

3/4" Chrome Rear Axle Kit- 10.25" Long - Fits Shovelhead Hardtail Kit

Rigid style rear axle kit has a 9 1/2" bearing surface length with an outer diameter of 3/4".Rear axle kit includes 3/4" outer diameter axle, nut, spacer and washers. Spacers may have to be cut to length. Rigid style axles have milled area on hex head to...

Throttle Addiction

DIY Hardtail Sissy Bar Kit - Tall

These DIY hardtail sissy bar kits are designed for use with our Evo Sportster Hardtail Kit, and 5" flat fender, but can fit on most hardtail frames.  Constructed of 9/16" round stock with 1/4'" fender strap and mounting tabs. 9" wide between...

T-Sport Fairing - Matte Black - Smoke Lens

This T-Sport fairing is the perfect solution to style AND wind protection, cutting down on bug snacks and allowing you to ride comfortably. It's designed for direct fitment on 2006+ Dyna using the riser bolts and bottom-mount headlight bracket, however...

Throttle Addiction

Replica Harley OEM Front Oil Tank Mount

OEM replica front oil tank mount for all early big twin OEM frames. Nice quality reproduction of the original. This is a weld on tab that is already drilled and tapped. The TPI of the holes is 5/6-24 100% made in the USA to ensure the highest...

Drag Specialties

Neck Bearing and Race Replacement Kit - Big Twin & Sportster

Neck Bearing and Race Complete Replacement Kit - Big Twin & Sportster Includes two bearings, two races and two dust seals Replaces OEM 4830060 4831560 Fitment 82-21 XL (EXCEPT 21 SPORTSTER S/​RH1250S) 02-17 V-ROD 84-17...

Mid USA

Weld On Motorcycle Kickstand - Chrome

This custom weld-on kickstand is a great option for a ground up motorcycle build.  The sleek design features an internal spring and ball system to keep the kickstand in the up or down position and improves ground clearance over exterior spring...

Gasbox

Gasbox - Voltage Regulator Mount For Harley Big Twin

This Big Twin voltage regulator mount allows you to simply and cleanly mount your voltage regulator to the front 2 motor mount bolts of your Big Twin Harley Davidson. Thick, quality built tumbled stainless steel. YEARMAKEMODEL 1979 -...

Arlen Ness

Arlen Ness - Side Cover Set - FXR 1982-2000

These fXR side covers from Arlen Ness add a smoother look to your frame while providing more area to continue your paint scheme. Made of durable ABS plastic, these covers are designed to mount to the rear side panels. Sold unpainted and in pairs...

Knucklehead, Panhead Oil Tank Rear Fender Mount Bracket - Chrome

This wrap-around oil tank bracket is a replacement for the stock OE bracket. The bracket has a chrome finish. OEM No: 62585-36. Fits Knucklehead, Panhead, Flathead Harley models with rigid frames.    FITS: UL 1937-1947EL 1936-1940FL...

Universal Cycle

T-Sport Fairing - Gloss Black - Clear

This T-Sport fairing is the perfect solution to style AND wind protection, cutting down on bug snacks and allowing you to ride comfortably. It's designed for direct fitment on 2006+ Dyna using the riser bolts and the bottom triple tree mounted headlight,...

VTwin MFG

Rear Fender Mount U-Clamps - Raw

Replica Harley Knucklehead, Panhead, Flatheat rear fender mount u-clamps secure rear fender to frame cross tube. Sold in a set of two. Hardware included.  Raw steel.   FITS: UL 1938-1947EL 1936-1940FL 1941-1957

Knucklehead, Panhead Oil Tank Rear Fender Mount Bracket - Raw Steel

This wrap-around oil tank bracket is a replacement for the stock OE bracket. The bracket has a chrome finish. Fits Knucklehead, Panhead, Flathead Harley models with rigid frames.    Raw Steel OEM No: 62585-36  FITS: UL...

Weld On Juice Brake Anchor Tab

Weld this bad boy on our shovelhead hardtail to allow the use of a juice drum brake.

T-Sport Fairing - Matte Black - Clear

This T-Sport fairing is the perfect solution to style AND wind protection, cutting down on bug snacks and allowing you to ride comfortably. It's designed for direct fitment on 2006+ Dyna using the riser riser bolts and bottom-mount headlight bracket,...

Pangea Speed

Pangea Speed - Upper Fender Mounting Kit - 139

includes mounting tab, 2 threaded bungs, 2 washers, and two bolts. mild steel

Hardtail Sissy Bar - Short

These hardtail sissy bars designed for use with our Evo Sportster Hardtail Kit, and 5" flat fender, but can fit on most hardtail frames.  Sissy bars are TIG welded and ready for installation. Constructed of 9/16" round stock with 1/4'" fender...

Mid USA

Ribbed Teardrop Toolbox - Chrome

Reproduction of the 1940-1954 ribbed teardrop cover tool box for the right hand side.  Chrome-plated. The lid locks and two keys are included. Fits Big Twin 1940-1999 with proper mounting bracket (not included).

Pangea Speed

Pangea Speed - Chopper Fender Mount - 137

Thisis a 16g steel mounting bracket that you can weld to the lower part of your fender when running a chopper fender on a big twin rigid frame. This mount is designed to match the style of the factory frame mount. long enough to trim to fit and cover a...

Throttle Addiction

Mechanical Brake Crossover Tube Supports Knucklehead and Panhead Frames

Replacement OEM style brake crossover support tabs for OEM rigid frames Fits 1936-1957 Knucklehead and Panhead frames.  Perfect to repair or restore your frame to run your factory mechanical drum brake again. Stamped in the USA from USA grade steel...

Drag Specialties

Big Twin & Sportster Fork Stem Dust Covers - Chrome

Big Twin & Sportster Fork Stem Dust Covers - Chrome  Upper and lower set of zinc-plated dust covers For use with Timken bearings Replaces OEM part numbers 4836180 4836548 4836548A 4836548B 4836548C Fitment 66-17 Big...

Pangea Speed

Pangea Speed - Oil Tank Mounting Kit - 131

This kit allows you to mount a horse shoe oil tank to a 36-57 rigid early frame. comes with 2 tabs, 2 threaded bungs, 2 bolts. Tabs are designed with slots that allow you to have slotted holes that give you slack in either side to side or front to back...

Mid USA

Weld On Motorcycle Kickstand - 1.25" - Black

This custom weld-on kickstand is a great option for a ground up motorcycle build.  The sleek design features an internal spring and ball system to keep the kickstand in the up or down position and improves ground clearance over exterior spring...

Throttle Addiction

1936-1940 Knucklehead XE-35 Flathead Replica Replacement Neck 25 Degree.

This replacement neck casting is a copy of the 1936-1940 Knucklehead 25 degree forgings used on Big Twin frames.  The casting is 100% made and machined in America from ductile iron.  These were 3D scanned off an original forging and reproduced...

Throttle Addiction

OEM Replica Later Panhead & Shovelhead Frame Top Engine Mount Stampings

These are replica replacement frame Top motor mount stampings made to fit 1953-1969 OEM Harley Davidson Panhead and Shovelhead Frames. Great to repair your factory motor mounts that are bent or just plain missing from the chopper days. Sold as...

Speed Merchant

Speed Merchant - Skid Plate Harley Dyna 2006-2017 - Black

Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '06-'17 Dyna models Hand-made from aluminum in the USA Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or...

Mid USA

Big Twin Fork Bearing Neck Cup Kit With Internal Stop - Chrome

 Big Twin Fork Bearing Neck Cup Kit With Internal Stop - Chrome Requires a flat style lower fork bracket (like shown under additional images) suitable for installing the stop plate The stop plate can be installed to provide a 70° swing or a...

Speed Merchant

Speed Merchant - Skid Plate Harley Dyna 1991-2005 - Black

Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '91-'05 Dyna models Hand-made from aluminum Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or welding Mounting...

Mid USA

Weld On Motorcycle Kickstand - 1.125" - Black

This custom weld-on kickstand is a great option for a ground up motorcycle build.  The sleek design features an internal spring and ball system to keep the kickstand in the up or down position and improves ground clearance over exterior spring...

Throttle Addiction

4 Speed Transmission Brace for Big Twin Frames

Rear 4 speed transmission brace for 1936-1984 Big Twin Frames. These are the braces that run from front to rear underneath your transmission mounting plate. These plates are laser cut and pressed right here in the USA from USA grade steel

Mechanical Brake Crossover Shaft Tube Panhead Knucklehead

Perfect for restoring your early OEM frame with mechanical drum brakes. These are a nice accurate reproduction and come complete with 1 tube bushing and the correct OEM style grease fitting. These fit all OEM Big Twin Frames from...

Speed Merchant

Speed Merchant - Skid Plate Harley FXR - Black

If you're looking for a way to beef up your FXR and add some protection then this skid plate from Speed Merchant is a good fit for you. Fits: 1982-1994 and 1999-2000 Harley FXR models Hand-made from aluminum Available in brushed finish or black...

Speed Merchant

Speed Merchant - Skid Plate Harley Dyna 2006-2017 - Brushed Aluminum

Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '06-'17 Dyna models Hand-made from aluminum in the USA Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or...

Speed Merchant

Speed Merchant - Skid Plate Harley Softail 2018 - Black

Add some attitude and protection to your new 2018 Harley Softail. Fits: 2018 Harley Softail Models Hand-made from aluminum in the USA Available in brushed finish or semi-gloss black powder-coat Mounting hardware included Bolts up to stock HD frame, no...

Speed Merchant

Speed Merchant - Skid Plate Harley Softail 2018 - Brushed Aluminum

Add some attitude and protection to your new 2018 Harley Softail. Fits: 2018 Harley Softail Models Hand-made from aluminum Available in brushed finish or semi-gloss black powder-coat Mounting hardware included Bolts up to stock HD frame, no cutting or...

Speed Merchant

Speed Merchant - Skid Plate Harley FXR - Brushed Aluminum

If you're looking for a way to beef up your FXR and add some protection then this skid plate from Speed Merchant is a good fit for you. Fits: 1982-1994 and 1999-2000 Harley FXR models Hand-made from aluminum Available in brushed finish or black...

Speed Merchant

Speed Merchant - Skid Plate Harley Dyna 1991-2005 - Brushed Aluminum

Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '91-'05 Dyna models Hand-made from aluminum Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or welding Mounting...