Exhaust

Mid USA

Shovelhead Drag Pipe Exhaust 1971-1984

These chrome plated drag pipes for your Harley Shovelhead will add a nice low rumbling tone.  The pipes are single piece, slash cut and have no baffles. Run them as they are, apply some heat wrap or cut them short.  Custom applications or...

Drag Specialties

Big Twin / Sportster Exhaust Port Gaskets - 2 Pack

Mesh Exhaust Port Gaskets for Harley Big Twin and Sportster motors. Fits Big Twin Evolution, Sportster Evolution and Big Twin Twin Cam motors. Sold in Pairs.  1984 - 2019 Big Twin & XL     

James Gasket

James Gasket - Fire-Ring Shovelhead Exhaust Gasket Kit - 1966-1984

James Gasket's Fire Ring exhaust gasket kit comes complete with exhaust gaskets, studs, lock washers and chrome nuts. Made in the U.S.A. YEARMAKEMODEL 1979 - 1980 Harley-Davidson 1200 Fat Bob - FXEF 1977 - 1979 Harley-Davidson 1200...

Universal Cycle

Exhaust Anti Reversion Torque Cones - Shovelhead

Stainless steel anti-reversion cones install into Shovelhead exhaust headers and provide more power by increasing the exhaust gas velocity.   Helps reduce reversion Simple install Sold in pairs Improves power throughout RPM range Stainless...

James Gasket

James Gasket - Fire-Ring Exhaust Port Gaskets Shovelhead - 1966-1984

High-quality exhaust port gaskets for Shovelhead motors featuring James Gasket Fire Ring technology. Copper and fiber construction. Made in the U.S.A. by James Gaskets Sold in pairs YEARMAKEMODEL 1979 - 1980 Harley-Davidson 1200 Fat Bob -...

Universal Cycle

Exhaust Retaining Flange Kit - Big Twin 1984-2013 - Sportster 1986-2013

This exhaust set kit will replace Harley Davidson OEM # 65328-83, 65325-83.  Each set includes 2 chrome flanges and 2 retaining clips.  Fitment: 1984 - 2013 Harley Big Twins (Evolution and Twin Cam) 1986 - 2013 Harley Sportsters    ...

Mid USA

Shovelhead Drag Pipe Exhaust 1971-1984 Black Primer

These black primer coated drag pipes for your Harley Shovelhead will add a nice low rumbling tone.  The pipes are single piece, slash cut and have no baffles. Run them as they are, apply some heat wrap or cut them short.  The exhaust kit...

Mid USA

Shovelhead Drag Pipes - 2" Chrome Slash Cut

These low budget drag pipes get the job done.  Lets us be perfectly clear, these can be a little rough and are not even close to a show chrome finish.  Some have pocks or blemishes here or there. However, if you're current exhaust is wired...

James Gasket

James Gasket - Pushrod Tube Cork Seals- 1948-1979 Panhead Shovelhead

12 pushrod cork seals for Panhead and Shovelhead engines. O-rings sold separately James complete kits are neatly packaged for easy display Made in the U.S.A. YEARMAKEMODEL 1977 - 1979 Harley-Davidson 1200 Electra Glide Classic - FLH 1979...

Paughco

Paughco - Chrome 1 3/4" 2 into 1 headpipe - 1970-1984 Shovelhead

Pauchgo 2 into 1 headpipes for Harley Davidson Shovelhead FL touring models from 1970-1984. Two-piece single-crossover or 2-into-1 styles Fit swingarm frames with electric start  Headpipes can be used with a variety of universal mufflers and...

Paughco

Paughco Panhead Slash Cut Exhaust 1948-1965 - 1.75" - Chrome

Paughco short slash cut exhaust for Harley Panhead motors.  This exhaust set will fit both rigid and swing arm frames, however modification to the rigid frame is required.  These have a lower ground clearance than stock exhaust. Fits...

Mid USA

Weld On Shovelhead Exhaust Flange

Raw steel weld-on exhaust flanges for Shovelhead motors. A must for making custom exhaust for your Harley Shovelhead. Sold in pairs Made in USA

Bassani

Bassani - High Horsepower Road Rage 2 into 1 Stainless Harley FXR

2-into-1 equal-length headers Stepped 1/3/4" to 1-7/8" to 2" Utilizes an advanced inner collector for maximum performance Stainless steel Construction with Hand Tig Welding Megaphone muffler Fits FXR Mid- Controls '84 - 94 and '99 -2000 Fits both...

Paughco

Paughco - Chrome 1 3/4" Drag Pipes 1970-1984 FL Shovelhead

These American made Paughco drag pipes fit Harley Shovelhead FL touring models from 1970-1984.  A great upgrade from the stock or beat up old exhaust your motorcycle is currently sporting. Pipes feature a bright chrome finish 34" slash-cut drag...

Paughco

Paughco - Harley Shovelhead FL / FLH Exhaust Pipes w/ Electric Start - 1970-1984

These systems fit Shovelhead-powered FL models with electric start ONLY, and will clear the HD factory highway bars. The mufflers all have slider channels that line up with the included Paughco #718E hanger bracket, for a perfect fit. Chrome muffler...

Goose Neck Evolution Softail Exhaust Drag Pipe Set - 1996-1999

Chrome goose neck style drag pipes for FXST Harley Softail models.Additional brackets and/or hardware may be required for installation. **CAUTION:  These products are intended for non-highway only.  FITS: FXST 1996-1999 Evolution Big Twin...

Trask

Trask - Assault 2-Into-1 Stainless Exhaust For Harley FXR 1984-2000

This dyno tested exhaust system is made from the highest quality 16 gauge stainless steel materials, mandrel bent, and then tig welded and gusseted for strength. Complete with custom heat shields including safety wired fasteners for a race inspired look...

Supertrapp

Supertrapp - Shovelhead 2-Into-1 High-Exit Megaphone Exhaust - Stainless

SuperTrapp high exit 2 into 1 exhaust system for Harley Shovelhead motors from 1971-1984.  Stainless steel construction. Megaphone system with patented SuperTrapp tunable disc technology Adjust sound levels and powerband by adding or removing 4"...

Supertrapp

Supertrapp - Shovelhead 2-Into-1 High-Exit Megaphone Exhaust - Chrome

SuperTrapp High exit 2 into 1 exhaust system for Harley Shovelhead motors from 1971 - 1984 Megaphone system with patented SuperTrapp tunable disc technology Adjust sound levels and powerband by adding or removing 4" external discs Includes 12 4" discs,...

Paughco

Paughco - Chrome Shovelhead Shotgun Style Exhaust Pipes - 1971-1984

Chrome American made exhaust set for Harley shovelhead.  Mufflers and exhaust are one piece.   Chrome muffler pipes for swingarm frames with kick or electric start Equipped with slider channels Hanger bracket PART #1861-1045 required to...

Paughco

Paughco - Chrome Shovelhead Shotgun Exhaust Pipes - 1971-1984

These pipe sets are for swingarm frames with kick or electric start and swing-out kicker arm ONLY. They are all equipped with slider channels so that you can use a Paughco #718B-1 (sold separately) to mount the front pipe and a Paughco #718J hanger...