Big Twin Parts

Throttle Addiction

Frisco Sportster Peanut Gas Tank

This classic Sportster gas tank has been set up with a low "Frisco" tunnel to maximize fuel capacity and sit high and stylish on the backbone. Commonly refered to as a Peanut Tank,  It will give your chopper or bobber a custom look but still carry...

Throttle Addiction.

Custom Harley Points / Timing Cover - "Customize Your Own"

People are going to want to eyeball your ride anyway, why not have a message or logo that either starts a friendly conversation or perhaps gets you punched in the face?  We can laser engrave whatever you want (Have we seen it all? Challenge us!) on...

Throttle Addiction

Custom Harley Derby Cover "131"

Please check the guide in the photos to help assist you in your cover choice.  Custom Laser Derby Cover "131" available in Matte Black, Gloss Black and Wrinkle Black finishes. Not available in chrome.   D - 1999-2018 Big Twin (Excludes...

Throttle Addiction

Throttle Addiction Rabbit Ear Handlebars - Chrome

Classic style rabbit ear pull back handlebars give you a tight comfortable grip on your bike.  They look great on long raked out choppers or stock rake motorcycles.  The rabbit bar handlebars will put you in a comfortable relaxed riding...

Throttle Addiction

Flanders Style Motorcycle Risers - 6"

Throttle Addiction Flanders style risers are constructed from cast stainless steel and polished to a mirror shine.  These require ½” X 20 TPI mounting bolts and work with 1" handlebars. Specs: Stainless steel 6” rise to...

Throttle Addiction

Flanders Style Motorcycle - Risers - 2.5"

Throttle Addiction Flanders style risers are constructed from cast stainless steel and polished to a mirror shine.  These require ½” X 20 TPI mounting bolts and work with 1" handlebars. Specs: Stainless steel 2.5” rise to...

Throttle Addiction

Harley Points Cover - Slammin' Gears Chuggin' Beers - Black

People are going to want to eyeball your ride anyway, why not have a message or logo that either starts a friendly conversation or perhaps gets you punched in the face? Laser Engraved Points/Timing Covers Available In Wrinkle, Matte or Gloss Finish...

Throttle Addiction

16 AWG Vintage Cloth Covered Automotive Electrical Wire - Black - 10 FT

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use something that looks nice!  This 16 AWG wire is insulated with modern PVC coating before being...

Harley Points Cover - Beautiful F U - Black

People are going to want to eyeball your ride anyway, why not have a message or logo that either starts a friendly conversation or perhaps gets you punched in the face? Laser Engraved Points/Timing Covers Available In Wrinkle, Matte or Gloss Finish...

Throttle Addiction

Throttle Addiction - 12" Vintage Ape Hangers

Sometimes old is better and the vintage apes follow that creed.  Unlike more modern styled ape hangers, these have a narrow clamping area and spread out wider towards the gripping area giving the uprights a nice stylish angle.  They're...

Universal Cycle

1" Chrome Single Cable Throttle Assembly

1” single cable throttle assembly for use on custom Harleys that want a clean handlebar set up.  Clamp assembly is die cast chrome-plated aluminum and throttle tube is plastic.  Dual Allen heads clamp it into place.  For 1”...

Universal Cycle

Black 1/4" Neoprene Fuel Line

Black neoprene motorcycle fuel line is reinforced with a high strength rayon mesh. Resists fuel, oil and grease Maximum PSI of 200 with a burst pressure of 450 PSI Sold in 3' lengths, 10' lengths or 25' lengths

Throttle Addiction

12 AWG Vintage Cloth Covered Automotive Electrical Wire - Red with 3 Black Tracers - 10 FT

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use something that looks nice!  This 12 AWG wire is insulated with modern PVC coating before being...

Throttle Addiction

Custom Harley Derby Cover "128"

Please check the guide in the photos to help assist you in your cover choice.  Custom Laser Derby Cover "128" available in Matte Black, Gloss Black and Wrinkle Black finishes. Not available in chrome.   D - 1999-2018 Big Twin (Excludes...

Throttle Addiction

Throttle Addiction - 9" Vintage Ape Hanger Handlebars - Chrome

Throttle Addiction 9” vintage ape hangers are the perfect height for a comfortable ride, and the tight clamping area makes them stylish as hell.  The bars are knurled at 3.5” spacing to keep them locked in place on standard Harley...

Throttle Addiction

Panhead / Shovelhead Weld-On Hardtail With Cast Axle Plates

Throttle Addiction weld on hardtail mates beautifully to all Harley Davidson Panhead and Shovelhead swing arm frames from years 1958-1985.  The kit accurately recreates Panhead hardtail frame dimensions and styling.  The Shovelhead...

Throttle Addiction

12 AWG Vintage Cloth Covered Automotive Electrical Wire - Yellow with 3 Black Tracers - 10 FT

Using this vintage style cotton braided wire will help finish off your motorcycle project with a touch of class.  If you have to see the wires, use something that looks nice!  This 12 AWG wire is insulated with modern PVC coating before being...

Throttle Addiction

Vintage Style Throttle Assembly - Black - Single Cable

Our beautifully refined, stripped down throttle assembly is a simple fit and cost effective option for your 1” handlebars.   Includes plastic throttle tube Single cable Fits 1" handlebars Threaded for 1/4-20 throttle cable  

Universal Cycle

5" Rolled Edge Ribbed Motorcycle Fender

This 5” steel fender is a close reproduction to the original Wassell ribbed fenders of years past.  It features two fully finished ends, so you could get two fenders out of one.  The sides are 100% edge rolled so the entire fender has a...

Throttle Addiction

Throttle Addiction - 11" T-Bars - Chrome

Throttle Addiction 11" T-bars will leave you with a tight aggressive riding stance.  A slight 2” pullback slightly relaxes the wrists for a more comfortable grip.  At 26” wide, you'll have ample control without the "I'm about to hug...

Mid USA

Vintage Harley Big Twin Style Springer Front End - Black and Chrome

Vintage style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes chrome top clamp and 3/4" axle kit. Fully assembled with in-line top clamp – 0 degree rake 1” O.D...

Throttle Addiction

Vintage Style Throttle Assembly - Black - Double Cable

Our beautifully refined, stripped down motorcycle throttle assembly is a simple, clean and cost effective option for your 1” handlebars. Die cast aluminum with satin black finish.     Dual cable Fits 1" handlebars Threaded for...

Throttle Addiction

Throttle Addiction - 14" Vintage Ape Hangers - Chrome

Sometimes old is better and the vintage apes follow that creed.  Unlike more modern styled ape hangers, these have a narrow clamping area and spread out wider towards the gripping area giving the uprights a nice stylish angle.  They're...

Universal Cycle

Cam Style Harley Davidson Gas Cap - Gloss Black - Vented

This vented gloss black cam or bayonet-style gas cap fits Harley Davidson gas tanks from 1936-1982 and most of the custom gas tanks sold by Throttle Addiction. Features: Gloss black Steel construction with rubber gasket

Throttle Addiction

Flanders Style Motorcycle Risers - 4"

Throttle Addiction Flanders style risers are constructed from cast stainless steel and polished to a mirror shine.  These require ½” X 20 TPI mounting bolts and work with 1" handlebars. Specs: Stainless steel 4” rise to...

Universal Cycle

7mm Braided Cloth Spark Plug Wire Kit - Gold / Black

These vintage style cloth wrapped spark plug wires will add a nice accent to your vintage motorcycle.  They feature 7mm solid core copper conductor, PVC wrapped and then covered in cotton wrap for that old school look.  The kit includes clips...

Drag Specialties

Harley Breaker Plate with Points and Condenser 1970-1999

Replacement breaker plate assembly with points and condenser for Harley Sportster 1971-1985 (except single fire ignition) and Big Twin 1970-1999. Replaces OEM # 32577-70  

Universal Cycle

Black Motorcycle Solo Seat Hinge

This seat bracket will fit most solo seats. It features two long slots for adjustability. The pivot bracket is unfinished so it can be welded to the backbone of your frame. The hinge bung mates seamlessly to 1.5" tubing. Includes Allen head pivot...

Throttle Addiction

Flanders Style Motorcycle Risers - Short

Throttle Addiction Flanders style risers are constructed from cast stainless steel and polished to a mirror shine.  These require ½” x 20 TPI mounting bolts and work with 1" handlebars. Specs: 1" rise to bottom of the handlebar...

Universal Cycle

6" Harley Motorcycle Riser Kit

This 6” chrome riser kit includes chrome risers, chrome top clamp and top clamp bolts.  The risers are threaded to accept ½” x 13 TPI bolts which are not included.    Specs: 6” rise Fits 1”...

Throttle Addiction

Custom Harley Derby Cover "Beautiful F U"

Please check the guide in the photos to help assist you in your cover choice.  Custom Laser Derby Covers available in black Matte, Wrinkled or Gloss Finish. - Not available in chrome.  Choose from the following: A - 1970-1999 Big Twin B -...

Paughco

Dual Headlight Mounting Bracket- Paughco

This is the bracket if you're looking to run dual headlights on your chopper.  Will require drilling hole in your bottom triple tree, otherwise it will mount up to most springer front ends.   Steel construction Chrome-plated 3/8" holes 7"...

Universal Cycle

Harley Knucklehead / Panhead Oil Tank Battery Tray 1936- 1964

Replica oil tank mount and battery tray for Harley Knucklehead and Panhead.  Fits stock oil tanks and frames from 1936- 1964.  Can be adapted for custom use. Stamped steel Chrome finish

Wyatt Gatling

Springer Fork Headlight Mount

Springer fork headlight mount is zinc-plated and constructed of investment cast steel with fine threads. Use this bracket when moutning your aftermarket, stud style headlight to a vintage Knucklehead, Flathead or Panhead Springer.  These will also...

Mid USA

Vintage Harley Big Twin Style Springer Front End - Chrome

Vintage style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes chrome top clamp and 3/4" axle kit. Fully assembled with in-line top clamp – 0 degree rake 1” O.D...

Universal Cycle

Quarter Fairing Kit Smoke Lens - Harley Dyna Sportster - 39mm Narrow Glide

This sleek quarter fairing kit in vivid black will give your Harley Sportster or Dyna that race inspired feel.  The fork installation brackets and mounts are all included with this kit. Complete with smoke lens to keep your dark horse rollin dirty!...