Fork Components

Universal Cycle

Black 39mm Fork Boots - Sportster / Dyna

6 3/4" Black Rubber Boots that fit 39mm forks on FXD Dyna & XL Sportster Model Harleys.  Books keep your sliders clean from road grime and just look cool! Sold in pairs and includes mounting zip ties.    

Universal Cycle

49mm Top Triple Tree Clamp - 2006-2017 Dyna FXD , Street Bob Replacement

This 49mm upper triple tree is a great replacement for those in possession of the Harley Street Bob.   In the MoCo's infinite wisdom, they produced this model with a triple tree featuring integrated risers.  Replacing that top clamp with...

Custom Cycle Engineering

39mm Extended Fork Tubes for Sportster / Dyna Narrow Glide 10 in. Over 34.25"

These Custom Cycle Engineering 39mm hydraulic extended fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 Sportster XL (EX 00-05 FXDX, FXDXT) 34.25" in length, 10" over stock length Show chrome finish Made...

Universal Cycle

Springer Top Clamp Handle Bar Adapter for 3.5" Center

Springer front end adapter plate allows you to run 3.5" spaced riserless handlebars or use non-springer risers with your springer front end.  The plate bolts to the 4.75" spaced bolts on the springer legs, and the second set of 3.5" spaced mounting...

Harddrive Parts

35mm Fork Tubes For Ironhead / Shovelhead - Hard Chrome - Various Lengths

35mm fork tubes for Harley Ironhead Sportster and Harley Shovelhead fork tubes are hard chrome finish and available in extended, standard or shortened length. Sold in pairs. available in 2" increments from 8" over to 2" under stock length...

Universal Cycle

Springer Fork Top Clamp For Post Risers - Chrome

Inline springer fork top triple tree with 1/2" mount holes for mounting post style/ bolt on risers.  It's constructed of cast steel and is chrome-plated.Inline top triple tree fits stock or custom spring forks. 1/2" holes allow post risers to be...

Sportster / Dyna 39mm Fork Slider Rebuild Seal Kit

This complete kit includes all parts needed for a complete rebuild of one set of 39mm front fork leg assemblies commonly found on Sportstser and Dyna front ends. The fork rebuild kit includes bushings, seals, o-rings, dust cover gaskets and clips...

Harddrive Parts

39mm Extended Fork Tubes for Sportster / Dyna Narrow Glide - Hard Chrome - Various Lengths

These replacement and extended 39mm fork tubes fit Harley Evolution Sportster and Dyna Narrow Glide front ends. They feature a hard chrome finish and are sold in pairs. When replacing fork tubes it is best to replace all seals and bushings with a fork...

Throttle Addiction

Narrow 41mm Hydra Glide Triple Tree Set

These Throttle Addiction Custom Narrow Hydra-Glide 41mm triples trees with shave inches off your front end width.  Throttle Addiction acquired this product design and production rights from Visionary Cycle Products in early 2021. These are 3"...

Custom Cycle Engineering

39mm Extended Fork Tubes for Sportster / Dyna Narrow Glide 8 in. Over 32.25"

These Custom Cycle Engineering 39mm extended hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 Sportster XL (EX 00-05 FXDX, FXDXT) 32.25" in length, 8" over stock length Show chrome finish Made...

Colony

Harley Triple Tree Steering Stem Nut With Lock Washer - 1960 - UP Harley Davidson FL, FLH

Colony Steering Stem Nut/Lockwasher Kit Precision-machined stock stem nut and stamped steel lock washer For models without steering damper Made in the U.S.A. Zink Plated Colony part # 3050-2 Fits- Throttle Addiction Hydra Glide triple...

Custom Cycle Engineering

39mm Extended Fork Tubes for Sportster / Dyna Narrow Glide 6 in. Over 30.25"

These Custom Cycle Engineering 39mm hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 Sportster XL (EX 00-05 FXDX, FXDXT) 30.25" in length, 6" over stock length Show chrome finish Made in the...

Harley 39 mm Fork Tube Extensions - 3"

These 39 mm Fork Tube Extensions are a quick easy solution to adding a little length to your front end.  Extends 3" Made from stainless steel Extends all 39 mm fork tubes Perfect when installing 23" and 26" front wheels, or to raise the bike...

Custom Cycle Engineering

39mm Fork Tubes for Sportster / Dyna Narrow Glide Stock Length 24.25"

These Custom Cycle Engineering 39mm hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 Sportster XL (EX 00-05 FXDX, FXDXT) 24.25" in length - stock length Direct OEM replacement #45360-90 Show...

Custom Cycle Engineering

39mm Extended Fork Tubes for Sportster / Dyna Narrow Glide 4 in. Over 28.25"

These Custom Cycle Engineering extended 39mm hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 Sportster XL (EX 00-05 FXDX, FXDXT) 28.25" in length, 4" over stock length Show chrome finish Made...

Universal Cycle

39mm Front End Lowering Kit Sportster / Dyna 1987- Later

This complete kit will lower your 39mm Harley Sportster or Dyna Narrow Glide front end by up to 2".  The kit includes easy-to-follow instructions and can be completed with out removing the fork tubes from the lower legs.   Designed to fit all...

Universal Cycle

39mm Sportster Fork Shrouds - Black - 1986 to 2003

These fork shrouds are designed to fit Harley 39mm front ends used on Sportsters and some Dyna models.  They are a quick bolt-on part that requires minimal time and effort.  Simply loosen your pinch bolts on the triple tree, drop the fork tube...

Drag Specialties

Fork Slider Rebuild Seal Kit - 41 mm

Fork Slider Rebuild Kit - 41 mm Includes all parts needed for complete rebuild of front fork leg assemblies 86-98 FLT/FLHT/FLHR/FLTRFLST 84-98 FXST 93-98 FXDWG 84-86 FXWD

Pangea Speed

Pangea Speed - Springer Top Clamp

This top clamp is the only clamp on the market that will allow you to run bolt on risers and still keep your handlebars nice and narrow. Designed to work on Harley Inline Springers and most reproduction Inline springers.  Machined out of mild steel...

Speed Merchant

Speed Merchant - 49mm Fork Preload Adjusters - Gold

These adjusters will replace your stock fork caps and allow you to fine tune your front suspension, with almost an inch of preload adjustment. Easily dial in your front-end preload without having to remove the stock caps and cutting spaces, with a turn...

Custom Cycle Engineering

Extended 49mm Fork Tubes 33.50" For Harley 2006-2017 - Show Chrome

If your stock upper tubes are pitted and worn out or if you are going to play chopper, you need new fork tubes! Custom Cycle Engineering offers their high quality tubes in two finishes and a whole variety of lengths, so if you're looking for a quality...

Custom Cycle Engineering

39mm Extended Fork Tubes for Sportster / Dyna Narrow Glide 2 in. Over 26.25"

These Custom Cycle Engineering extended 39mm hydraulic fork tubes fit the following Harley Davidson models: 1987-1994 FXR, 1991-2005 FXD, 1987-2007 Sportster XL (EX 00-05 FXDX, FXDXT) 26.25" in length, 2" over stock length Show chrome finish Made...

Universal Cycle

39mm Sportster Fork Shrouds - Chrome - 2004 and Up

These fork shrouds are designed to fit Harley 39mm front ends used on Sportsters and some Dyna models.  They are a quick bolt on part that requires minimal time and effort.  Simply loosen your pinch bolts on the triple tree, drop the fork tube...

Drag Specialties

Fork Slider Rebuild Seal Kit - 35 mm - '84-'87

Fork Slider Rebuild Kit - 35 mm - '84-'87 35mm Includes all parts needed for complete rebuild of front fork leg assemblies - does not include bushings or damper bolts.  84-85 XL 85-86 FX/FXR

Harley 39 mm Fork Tube Extensions - 2"

These 39 mm Fork Tube Extensions are a quick easy solution to adding a little length to your front end.  Extends 2" Made from stainless steel Extends all 39 mm fork tubes Perfect when installing 23" and 26" front wheels, or to raise the bike...

Pangea Speed

Pangea Speed - 41mm Narrow Axle - 091

This axle is designed to work with our 41mm narrow glide trees or any trees that are around 7in on center and the early style Panhead/gen shovel tapered sliders. This Axle is machined from stainless steel so rust is not an issue. This axle is 3/4 (.75in)...

Drag Specialties

High-Performance Mineral Fork Oil - 20Wt Heavy

Drag Specialties High-Performance Mineral Fork Oil - 20wt Heavy -1 U.S. Quart Recommended for use in both OEM and aftermarket fork assemblies Specially formulated for consistent damping action Ideal in either hot or cold climates, without fading or...

Speed Merchant

Speed Merchant - 49mm Elite Triple Trees 2006-2017 Dyna - Black

Speed Merchant 49mm elite triple trees Fits: 2006-2017 Harley Dyna models (Excludes Fat Bob and Wide Glide) CNC machined out of 6061 aluminum Available in black anodized finish or polished finish Includes steering stem and external hardware for use...

Custom Cycle Engineering

Extended 41mm Fork Tubes 32.25" For Harley 1997-2017 - Show Chrome

If your stock upper tubes are pitted and worn out or if you are going to play chopper, you need new fork tubes! CCE offers their high quality tubes in two finishes and a whole variety of lengths, so if you're looking for a quality product that looks...

Universal Cycle

39mm Sportster Fork Shrouds - Chrome - 1986 to 2003

These fork shrouds are designed to fit Harley 39mm front ends used on Sportsters and some Dyna models.  They are a quick bolt on part that requires minimal time and effort.  Simply loosen your pinch bolts on the triple tree, drop the fork tube...

Pangea Speed

Pangea Speed - 41mm Narrow Trees

These trees take styling cues from the original Hydra-Glide front ends but have a bit of their own unique flare as well.  They are stock narrow glide width (7in on center) which allows you to have a custom look while still running a front brake...

Drag Specialties

High-Performance Mineral Fork Oil - 10Wt Medium

Drag Specialties High-Performance Mineral Fork Oil - 10wt Medium -1 U.S. Quart Recommended for use in both OEM and aftermarket fork assemblies Specially formulated for consistent damping action Ideal in either hot or cold climates, without fading or...

Custom Cycle Engineering

Extended 41mm Fork Tubes 38.25" For Harley 1997-2017 - Show Chrome

If your stock upper tubes are pitted and worn out or if you are going to play chopper, you need new fork tubes! CCE offers their high quality tubes in two finishes and a whole variety of lengths, so if you're looking for a quality product that looks...

Custom Cycle Engineering

41mm Fork Tubes 20.25" For Harley 1997-2017 - Show Chrome

If your stock upper tubes are pitted and worn out or if you are going to play chopper, you need new fork tubes! CCE offers their high quality tubes in two finishes and a whole variety of lengths, so if you're looking for a quality product that looks...

Custom Cycle Engineering

Extended Gold 49mm Fork Tubes 27.5" For Harley 2006-2016

If your stock upper tubes are pitted and worn out or if you are going to play chopper, you need new fork tubes! Custom Cycle Engineering offers their high quality tubes in a variety of lengths, so if you're looking for a quality product that looks great...

Harley 39 mm Fork Tube Extensions - 1"

These 39 mm Fork Tube Extensions are a quick easy solution to adding a little length to your front end.  Extends 1" Made from stainless steel Extends all 39 mm fork tubes Perfect when installing 23" and 26" front wheels, or to raise the bike...