Frames & Hard Tails

Throttle Addiction

Deluxe Evolution Sportster Hardtail Kit 1982-2003

Due to Black Friday sale volume, Please allow up to a 7 week lead time for production on Hardtail kit orders Our Throttle Addiction weld on Sportster hard tail kit will transform you stock swing arm Sportster into a hard tail chopper in minimal time...

Throttle Addiction

Sportster Hardtail Add On Tab/Hardware Kit

Throttle Addiction Sportster Hardtail tab/ hardware kit. This kit conveniently contains all the tabs, spacers, brackets and hardware that are either welded onto or included with our Deluxe Sportster Hardtail. If you purchased our naked hardtail,...

Mid USA

Big Twin Fork Bearing Neck Cup Kit With Internal Stop - Chrome

 Big Twin Fork Bearing Neck Cup Kit With Internal Stop - Chrome Requires a flat style lower fork bracket (like shown under additional images) suitable for installing the stop plate The stop plate can be installed to provide a 70° swing or a...

Drag Specialties

Big Twin & Sportster Fork Stem Dust Covers - Chrome

Big Twin & Sportster Fork Stem Dust Covers - Chrome  Upper and lower set of zinc-plated dust covers For use with Timken bearings Replaces OEM part numbers 4836180 4836548 4836548A 4836548B 4836548C Fitment 66-17 Big...

Drag Specialties

Neck Bearing and Race Replacement Kit - Big Twin & Sportster

Neck Bearing and Race Complete Replacement Kit - Big Twin & Sportster Includes two bearings, two races and two dust seals Replaces OEM 4830060 4831560 Fitment 82-21 XL (EXCEPT 21 SPORTSTER S/​RH1250S) 02-17 V-ROD 84-17...

Sportster Neck Cup Conversion Kit

Use this conversion kit when installing a Big Twin or late Sportster 1" neck fork assembly on your early Sportster. Simply remove your existing cups and install these steel cups into your frame neck, and you're ready for Big Twin forks. Includes...

Paughco

Paughco 767D Distributor Hold Down - 1966-1969 FL- Chrome

Paughco 767D Distributor Hold Down - 1966-1969 - Chrome Single-bolt style with a chrome finish Also works with most aftermarket distributors Made in the U.S.A. Fitments YEAR MAKE MODEL 1966-1969 Harley-Davidson Electra Glide...

VTwin MFG

3/4" Chrome Rear Axle Kit- 10.25" Long - Fits Shovelhead Hardtail Kit

Rigid style rear axle kit has a 9 1/2" bearing surface length with an outer diameter of 3/4".Rear axle kit includes 3/4" outer diameter axle, nut, spacer and washers. Spacers may have to be cut to length. Rigid style axles have milled area on hex head to...

Throttle Addiction

1936-1940 Knucklehead XE-35 Flathead Replica Replacement Neck 25 Degree.

This replacement neck casting is a copy of the 1936-1940 Knucklehead 25 degree forgings used on Big Twin frames.  The casting is 100% made and machined in America from ductile iron.  These were 3D scanned off an original forging and reproduced...

Throttle Addiction

Sportster Hardtail Battery Tray/Hold Down

Battery tray and hold down designed to secure an Antigravity 12 cell small case battery for use with our Evolution Sportster Hardtail Kit. This weld-on battery tray and hold down mounts to the backside of the seat down tube, allowing the...

Drag Specialties

Rear Axle Adjuster Bolts 3/8 - 24 TPI

Chrome Rear Axle Adjuster Bolts fit our Sportster hardtail kits.  Sold in Pairs 3/8" X 24TPI X 3" long fits 48-72 Harley Big Twin and custom applications, OEM# 41576-36 Fits our Sportster hardtail kits.

Universal Cycle

Big Twin Fork Bearing Neck Cup Kit - Chrome

High quality fork cup and bearing kit. • Fits 1949 - '88 Big Twin models as well as most custom frames. • Kit includes: chrome bearings, neck cups and races. Replaces HD 48315-60, 48311-60 and 48300-60  

Speed Merchant

Speed Merchant - Skid Plate Harley Softail 2018 - Black

Add some attitude and protection to your new 2018 Harley Softail. Fits: 2018 Harley Softail Models Hand-made from aluminum in the USA Available in brushed finish or semi-gloss black powder-coat Mounting hardware included Bolts up to stock HD frame, no...

Speed Merchant

Speed Merchant - Skid Plate Harley Softail 2018 - Brushed Aluminum

Add some attitude and protection to your new 2018 Harley Softail. Fits: 2018 Harley Softail Models Hand-made from aluminum Available in brushed finish or semi-gloss black powder-coat Mounting hardware included Bolts up to stock HD frame, no cutting or...

Speed Merchant

Speed Merchant - Skid Plate Harley FXR - Brushed Aluminum

If you're looking for a way to beef up your FXR and add some protection then this skid plate from Speed Merchant is a good fit for you. Fits: 1982-1994 and 1999-2000 Harley FXR models Hand-made from aluminum Available in brushed finish or black...

Speed Merchant

Speed Merchant - Skid Plate Harley FXR - Black

If you're looking for a way to beef up your FXR and add some protection then this skid plate from Speed Merchant is a good fit for you. Fits: 1982-1994 and 1999-2000 Harley FXR models Hand-made from aluminum Available in brushed finish or black...

Speed Merchant

Speed Merchant - Skid Plate Harley Sportster 2004-2018 - Black

This aluminum skid plate was designed just for your Sportster. Handmade in sunny California by the Speed Merchant crew. Includes the necessary mounting hardware. YEARMAKEMODEL 2014 - 2017 Harley-Davidson Superlow - XL 1200T 2004 - 2006...

Speed Merchant

Speed Merchant - Skid Plate Harley Sportster 2004-2018 - Brushed Aluminum

This aluminum skid plate was designed just for your Sportster. Handmade in sunny California by the Speed Merchant crew. Includes the necessary mounting hardware. YEARMAKEMODEL 2014 - 2017 Harley-Davidson Superlow - XL 1200T 2004 - 2006...

Speed Merchant

Speed Merchant - Skid Plate Harley Dyna 1991-2005 - Black

Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '91-'05 Dyna models Hand-made from aluminum Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or welding Mounting...

Speed Merchant

Speed Merchant - Skid Plate Harley Dyna 1991-2005 - Brushed Aluminum

Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '91-'05 Dyna models Hand-made from aluminum Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or welding Mounting...

Speed Merchant

Speed Merchant - Skid Plate Harley Dyna 2006-2017 - Black

Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '06-'17 Dyna models Hand-made from aluminum in the USA Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or...

Speed Merchant

Speed Merchant - Skid Plate Harley Dyna 2006-2017 - Brushed Aluminum

Add a killer hand-made custom look to your Dyna with this trick skid plate from Speed Merchant. Fits: '06-'17 Dyna models Hand-made from aluminum in the USA Available in brushed finish or black powder-coat Bolt up to stock HD frame; no cutting or...

Arlen Ness

Arlen Ness - Side Cover Set - FXR 1982-2000

These fXR side covers from Arlen Ness add a smoother look to your frame while providing more area to continue your paint scheme. Made of durable ABS plastic, these covers are designed to mount to the rear side panels. Sold unpainted and in pairs...

Throttle Addiction

Panhead / Shovelhead Weld-On Hardtail With Cast Axle Plates

Due to Black Friday sale volume, Please allow up to a 2 week lead time for production on Hardtail kit orders Throttle Addiction weld on hardtail mates beautifully to all Harley Davidson Panhead and Shovelhead swing arm frames from years 1958-1985...

Throttle Addiction

Evolution Sportster Hardtail 1982-2003

This Sportster hardtail kit is designed to fit 1982-2003 Harley Davidson Sportster models. This is a basic evolution Sportster hard tail kit to convert a stock swing-arm Sportster into a rigid framed motorcycle with a 2" stretch. Features include solid...