Frame Fabrication Parts

Throttle Addiction

Replica Harley OEM Front Oil Tank Mount

OEM replica front oil tank mount for all early big twin OEM frames. Nice quality reproduction of the original. This is a weld on tab that is already drilled and tapped. The TPI of the holes is 5/6-24 100% made in the USA to ensure the highest...

Throttle Addiction

Weatherproof Starter Ignition Switch Mount - .80" - Stainless Steel

Laser cut from .125" Stainless Steel, these handy little guys allow you to mount your key switch virtually anywhere!  Designed to work with our Weather Proof Ignition/Starter Switch.    .80" Ignition hole with flat for anti...

Throttle Addiction

Ignition Switch Mount - 3/4" - Stainless Steel

Laser cut from .125" Stainless Steel, these handy little guys allow you to mount your key switch virtually anywhere!  Designed to work with our Motorcycle Ignition Switch, or any with a 3/4" shaft.   .75" Ignition hole .25" mounting...

Weld On Juice Brake Anchor Tab

Weld this bad boy on our shovelhead hardtail to allow the use of a juice drum brake.

VTwin MFG

Rear Fender Mount U-Clamps - Raw

Replica Harley Knucklehead, Panhead, Flatheat rear fender mount u-clamps secure rear fender to frame cross tube. Sold in a set of two. Hardware included.  Raw steel.   FITS: UL 1938-1947EL 1936-1940FL 1941-1957

Pangea Speed

Pangea Speed - Upper Fender Mounting Kit - 139

includes mounting tab, 2 threaded bungs, 2 washers, and two bolts. mild steel

Pangea Speed

Pangea Speed - Diy Peg Mount Kit - 029

This kit is designed to simplify the process of building floor board style peg mounts for early HD hard tail frames. Kit includes two upper peg mounts and two lower mounts. The upper mount is designed to work with Anderson style pegs and the lower mount...

Throttle Addiction

Early Panhead Top Frame Engine Motor Mounts 1948-1952

Early Top Motor for use when repairing original Harley Panhead frames.   This is a replica of the original shape with a slight modification done to the rear gas tank mount area for some extra strength. Fits all 1948-1951 Panhead Frames. this...

Throttle Addiction

Mechanical Brake Crossover Tube Supports Knucklehead and Panhead Frames

Replacement OEM style brake crossover support tabs for OEM rigid frames Fits 1936-1957 Knucklehead and Panhead frames.  Perfect to repair or restore your frame to run your factory mechanical drum brake again. Stamped in the USA from USA grade steel...

Pangea Speed

Pangea Speed - Chopper Fender Mount - 137

Thisis a 16g steel mounting bracket that you can weld to the lower part of your fender when running a chopper fender on a big twin rigid frame. This mount is designed to match the style of the factory frame mount. long enough to trim to fit and cover a...

Pangea Speed

Pangea Speed - Oil Tank Mounting Kit - 131

This kit allows you to mount a horse shoe oil tank to a 36-57 rigid early frame. comes with 2 tabs, 2 threaded bungs, 2 bolts. Tabs are designed with slots that allow you to have slotted holes that give you slack in either side to side or front to back...

Throttle Addiction

Weld-On Fender Mount Tab

Plasma cut from .175" thick mild steel, this tab is ideal for mounting fenders to frame cross bars. Or.........  

Throttle Addiction

OEM Replica Later Panhead & Shovelhead Frame Top Engine Mount Stampings

These are replica replacement frame Top motor mount stampings made to fit 1953-1969 OEM Harley Davidson Panhead and Shovelhead Frames. Great to repair your factory motor mounts that are bent or just plain missing from the chopper days. Sold as...

Throttle Addiction

Coped Weld-On Steel Tab

Laser cut from .135" mild steel, these handy little tabs can be used for all kinds of things.    1.25" cope 3/8" hole

Throttle Addiction

4 Speed Transmission Brace for Big Twin Frames

Rear 4 speed transmission brace for 1936-1984 Big Twin Frames. These are the braces that run from front to rear underneath your transmission mounting plate. These plates are laser cut and pressed right here in the USA from USA grade steel

Mid USA

Springer Front Fender Mounts - Black

Allows easy front fender installation. Also fits other brands of wide custom Springers with similar front leg diameters as listed. CNC machined from billet aluminum. Leg O.D. .950". Black Finish. Sold in sets.