Fenders

Throttle Addiction

Premium 5" Wide Wassell Style Ribbed Fender

If you're looking for a great alternative to the original Wassell ribbed motorcycle fender, you've found it.  Unlike the thin metal, beat up original found at swap meets, this fender will stand up to your abuse.  It's stamped from 14 gauge...

Throttle Addiction

Leather Washers - 5 pack - 1" with 5/16" Center

Grab a pack of these leather washers for your next custom install. Save yourself from scratches when putting on your freshly painted tins or just use them to give your bike a special finished look. 1" diameter with a 5/16" center opening.  Made...

Throttle Addiction

1952 - 1978 Sportster Style Rear Fender

This slick fender is a stripped down and cleaned up version of the 1952-1978 Harley Sportster fender.  It differs from the stock fender in that the skirts have been removed along with the mounting holes and chain indentation, leaving a smooth simple...

Leather Washers - 5 pack - 1" with 3/8" Center

Grab a pack of these leather washers for your next custom install. Save yourself from scratches when putting on your freshly painted tins or just use them to give your bike a special finished look. 1" diameter with a 3/8" center opening.  Made...

Throttle Addiction

Chrome Wassell Style Ribbed Fender - 5" Wide

We took our raw steel Wassell style ribbed fender and dipped it for a beautiful show chrome finish.  The fender has been stamped from single piece of 16 gauge steel, then laser cut for a precise edge.  Note that the end of the fender has a nice...

Universal Cycle

5" Rolled Edge Ribbed Motorcycle Fender

This 5” steel fender is a close reproduction to the original Wassell ribbed fenders of years past.  It features two fully finished ends, so you could get two fenders out of one.  The sides are 100% edge rolled so the entire fender has a...

Throttle Addiction

5.5" Smooth Fender

This is a smooth fender stamped from a single piece, and has no weld or sanding marks. Its subtle cross radius and end lip detail give it the right amount of flash when compared to a standard motorcycle trailer fender.  Constructed from thick 14...

Universal Cycle

5" Wide Flat Trailer Fender for Motorcycles

If you’re in the market for the tried and true trailer fender for your motorcycle you found it.  These rear motorcycle fenders are thick, cheap, and simple.  They’ll keep the dirt off your back while staying true to a classic taste...

Universal Cycle

6" Wide Ribbed Wassell Style Fender

 Dimensions: 29" tip to tip 6" wide 13.5" tall

Universal Cycle

4" Ribbed Fender

This ribbed fender is probably best suited for front wheels, but if you’re running a super skinny rear wheel then this will do the trick.  At 4” wide, it’s narrow but will keep the mud off your chest…or back.  This...

Universal Cycle

Bobbed Sportster Fender - 2004 and Up

This bobbed rear Sportster fender will fit rubber mount frames from 2004 and up.  Features the windowed side wall.  This is a stock replacement of the Sportster Seventy Two but will fit all models from 2004 and up.  Will require use of...

Universal Cycle

Bobbed Sportster Fender 1982-2003, No holes

This shortened bobber Sportster fender fits 1982-2003 models.  It features no holes or mounts which allows you to customize it as needed but still keep that original styling.  Great to shorten up, or use when mounting a custom tail light or...

Universal Cycle

Harley FXR Rear Fender 1981-1994

OEM spec replacement rear fender for Harley Davidson FXR motorcycles from 1982-1994. Comes pre-drilled for mounting and taillight.   Raw steel finish Pre-drilled for OEM fender struts, license plate mounts and taillight  

Universal Cycle

Fat Bob Motorcycle Fender - Left Side Drive

This Fat Bob fender is 7” wide and measures 38” along the top.  It comes undrilled so you can position it as needed on your frame.  The left side has a relief for a chain or belt.  Stamped from 19 gauge steel...

Universal Cycle

Rear Fender Brace - Chrome

Chrome hardtail fender braces measure 9.5" tall and feature 5/16" threaded mounting bosses.  One brace has a more drastic bend to account for clearing the brake.  Work great on fenders that have a larger side wall.   Use when supporting a...

Gasbox

Gasbox - Fender 16" Spun Steel for Vintage Style Tires

These fenders hug close and have great lines. There is enough room on the sides to mount a sissy bar or fender struts. These are the real deal - solid, beefy fenders individually hand made and great with vintage looking tires like the Avon MKII tires...

VTwin MFG

Rear Fender Mount U-Clamps - Raw

Replica Harley Knucklehead, Panhead, Flatheat rear fender mount u-clamps secure rear fender to frame cross tube. Sold in a set of two. Hardware included.  Raw steel.   FITS: UL 1938-1947EL 1936-1940FL 1941-1957

Universal Cycle

Rear Fender Brace - Raw

Chrome hardtail fender braces measure 9.5" tall and feature 5/16" threaded mounting bosses.  One brace has a more drastic bend to account for clearing the brake.  work great on fenders that have a larger side wall.   Use when supporting a...

Drag Specialties

Drag Specialties - Smooth Hinged Panhead / Shovelhead Rear Fender 1958-1984

This smooth hinged fender is a replacement for Panhead and shovelhead models from 1958-1984.  It features the proper mounting holes for fender struts. To allow for custom applications, there are no holes drilled for a tail light. Fits Panhead and...

Pangea Speed

Pangea Speed - Upper Fender Mounting Kit - 139

includes mounting tab, 2 threaded bungs, 2 washers, and two bolts. mild steel

Drag Specialties

Shovelhead Rear Fender 1973-1985

This stock replacement fender is an OEM replica for Harley FX Shovelhead models 1973-1985.  Comes predrilled with mounting holes and tail light mount. Uses stock mounts and has a raw steel finish Original-style fender with taillight mount

Pangea Speed

Pangea Speed - Chopper Fender Mount - 137

Thisis a 16g steel mounting bracket that you can weld to the lower part of your fender when running a chopper fender on a big twin rigid frame. This mount is designed to match the style of the factory frame mount. long enough to trim to fit and cover a...

Throttle Addiction

Chrome Wassell Style Ribbed Fender - 6" Wide

We took our raw steel Wassell style ribbed fender and dipped it for a beautiful show chrome finish.  The fender has been stamped from single piece of 16 gauge steel, then laser cut for a precise edge.  Note that the end of the fender has a nice...

Mid USA

Springer Front Fender Mounts - Chrome

Allows easy front fender installation. Also fits other brands of wide custom Springers with similar front leg diameters as listed. CNC machined from billet aluminum. Leg O.D. .950". Chrome Finish. Sold in sets.

Universal Cycle

Ribbed Front Fender For Sportser, Shovelhead, Dyna, 1973-Up W/ 39mm and 35mm Front End

Custom Front ribbed fender for Narrow Glide Sportster, Dyna, Shovelhead models using Narrow Glide 35mm or 39mm front forks.  This fender come raw and is ready to be prepped for paint.  Bracket is pre attached attached and is also raw steel...

6" Flat Fender - Straight End

6" Flat Fender - Straight End 6" Wide Straight end 29.5" Along bottom 41.5" Along top Flat fenders for custom applications 14-gauge steel construction

8" Bobbed Rear Fender - 2004 & Up

Fender comes raw, not predrilled or set up for lights.  Made from 16G steel Raw finish

Mid USA

Springer Front Fender Mounts - Black

Allows easy front fender installation. Also fits other brands of wide custom Springers with similar front leg diameters as listed. CNC machined from billet aluminum. Leg O.D. .950". Black Finish. Sold in sets.