Stock style mid control kit fits Harley Davidson Dyna FXD from 1991-2017. Mid foot controls put the rider in a more controlling position over the motorcycle. Forward controls can leave you feeling like you’re in a recliner, switching to this set up will put you in a more aggressive riding position. Includes almost everything you need to go back to a stock mid control set up. Parts are all finished in chrome. Supply a set of foot pegs and the peg mounting hardware and you’re on your way. Designed to reuse some hardware on your motorcycle. If at some point it was converted to aftermarket forward controls, it's possible that a different extended shifter arm was installed, in that case you will need to purchase the stock inner shifter arm. VERIFY that the shifter arm penetrates through the inner and outer primary. Many models such as a Dyna Wide Glide came with stock controls, and there was no hole drilled through the inner primary to accept a shifter arm shaft. If you do not have that hole in your inner primary, the only way to mount mid controls will be to install an inner primary with the shift arm shaft hole drilled in it.
- Chrome peg supports
- Chrome Shift Lever
- Rubber Shifter Peg
- Chrome Brake Lever with brass bushing and Master Cylinder threaded Rod
Hardware to be re-used from motorcycle:
- peg support arm bolts
- inner shifter arm
- This hardware should still be on your motorcycle even with a forward control set up, If you are starting from scratch or it is missing, it can easily be sourced from a local hardware store
- Peg mounting nuts and bolts
NOTE: will not fid Dyna wide glide with stock mid controls unless you replace the inner primary.
1 Review Hide Reviews Show Reviews
Looks good much cheaper and easier than the dealership or trying to piece it together